We gratefully acknowledge support from
the Simons Foundation and member institutions.

Physics

New submissions

[ total of 110 entries: 1-110 ]
[ showing up to 2000 entries per page: fewer | more ]

New submissions for Thu, 2 Dec 21

[1]  arXiv:2112.00001 [pdf]
Title: The Influence of Boreal Summer Madden-Julian Oscillation on Precipitation Extremes in Indonesia
Comments: 12 pages, 6 figures, conference
Subjects: Atmospheric and Oceanic Physics (physics.ao-ph)

This study examines the influence of Madden-Julian Oscillation (MJO) on Indonesian precipitation during the extended boreal summer (May to September). The MJO is one of the dominant intraseasonal variabilities that influence the extreme precipitation in the tropics, especially in Indonesia. The episodes of intense precipitation (95th percentiles) during active MJO phases from 1998-2015 are evaluated using the daily precipitation datasets from the gridded Asian Precipitation Highly Resolved Observational Data Integration Towards Evaluation of Water Resources (APHRODITE) and several station rain gauges. The boreal summer MJO influences the probability of extreme precipitation, especially in the west and north parts of Indonesia. The west part experiences an increase in the probability of extreme precipitation by up to 55\% and 80\% during phases 2 and 3, respectively. Moreover, the extreme precipitation probability in the north part increases by up to 40 to 70\% during phases 2 to 4. On the other hand, the influence of MJO is relatively weak in the south and east parts of Indonesia. The contrast of the precipitation response between the north and south parts of Indonesia is consistent with the northward movement of boreal summer MJO.

[2]  arXiv:2112.00005 [pdf, other]
Title: Estimation of the solar wind extreme events
Subjects: Space Physics (physics.space-ph); Solar and Stellar Astrophysics (astro-ph.SR)

This research provides an analysis of extreme events in the solar wind and in the magnetosphere due to disturbances of the solar wind. Extreme value theory has been applied to a 20 year data set from the Advanced Composition Explorer (ACE) spacecraft for the period 1998-2017. The solar proton speed, solar proton temperature, solar proton density and magnetic field have been analyzed to characterize extreme events in the solar wind. The solar wind electric field, vB$_{z}$ has been analyzed to characterize the impact from extreme disturbances in the solar wind to the magnetosphere. These extreme values were estimated for one-in-40 and one-in-80 years events, which represent two and four times the range of the original data set. The estimated values were verified by comparison with measured values of extreme events recorded in previous years. Finally, our research also suggests the presence of an upper boundary in the magnitudes under study.

[3]  arXiv:2112.00010 [pdf]
Title: Ultrafast multi-photon excitation of ScVO$_4$:Bi$^{3+}$ for luminescence thermometry
Comments: This was recently accepted to Optics Letters, but does not yet have the relevant doi and other information. We are waiting for the proofs
Subjects: Optics (physics.optics); Applied Physics (physics.app-ph)

We demonstrate a multi-photon excitation (MPE) scheme for luminescence thermometry using ScVO$_4$:Bi$^{3+}$. MPE is performed using a 37 fs Ti:Sapphire laser pulse centred at 800 nm. Log-log plots of the phosphorescence intensity versus excitation power show that the 800 nm MPE of ScVO$_4$:Bi$^{3+}$ involves a 2- and 3-photon absorption process in comparison to a single-photon excitation (SPE) process at 266 nm and 400 nm. Spectroscopic investigation shows that with the 800 nm MPE and 266 nm SPE schemes, the emission spectra of ScVO$_4$:Bi$^{3+}$ are similarly characterized by emissions of the VO$_4^{3-}$ groups and Bi$^{3+}$. The MPE is advantageous to suppress fluorescence which interfere with the phosphorescence signal. We demonstrate this aspect for a ScVO$_4$:Bi$^{3+}$ coating applied on an alumina substrate. The luminescence lifetime is calibrated with temperature over 294-334 K; the MPE scheme has an equally impressive temperature sensitivity (3.4-1.7% / K) and precision (0.2-0.7K) compared to the SPE schemes. The MPE scheme can be applied to a variety of phosphors and is valuable for precise temperature measurements even in applications where isolating interfering background emissions is challenging.

[4]  arXiv:2112.00077 [pdf, other]
Title: Technical note: On the use of polychromatic cameras for high spatial resolution spectral dose measurements
Subjects: Medical Physics (physics.med-ph)

Despite the demonstrated benefits of hyperspectral formalism for stem effect corrections in the context of fiber dose measurements, this approach has not been yet translated into volumetric measurements where cameras are typically used for their distinguishing spatial resolution. This work investigates demosaicing algorithms for polychromatic cameras based spectral imaging. The scintillation and Cherenkov signals produced in a radioluminescent phantom are imaged by a polychromatic camera and isolated using the spectral formalism. To do so, five demosaicing algorithms are investigated from calibration to measurements: a clustering method and four interpolation algorithms. The resulting accuracy of scintillation and Cherenkov images is evaluated with measurements of the differences (mean $\pm$ standard deviation) between the obtained and expected signals from profiles drawn across a scintillation spot. Signal-to-noise ratio and signal-to-background ratio are further measured and compared in the resulting scintillation images. Clustering, OpenCV, bilinear, Malvar and Menon demosaicing algorithms respectively yielded differences of $3\pm6\%$, $0.1\pm0.5\%$, $0.5\pm0.5\%$, $1\pm3\%$ and $1\pm4\%$ in the resulting scintillation images. For the Cherenkov images, all algorithms provided differences below 1\%. All methods enabled measurements over the detectability (SBR>2) and sensitivity (SNR>5) thresholds with the bilinear algorithm providing the best SNR value. Hence, radioluminescent signals can accurately be isolated using a single polychromatic camera. Moreover, demosaicing using a bilinear kernel provided the best results and enabled stem effect subtraction while preserving the full spatial resolution of the camera.

[5]  arXiv:2112.00085 [pdf, other]
Title: Design of a High-Resolution Rayleigh-Taylor Experiment with the Crystal Backlighter Imager on the National Ignition Facility
Comments: 6 pages, 6 figures
Subjects: Plasma Physics (physics.plasm-ph)

The Rayleigh-Taylor (RT) instability affects a vast range of High Energy Density (HED) length scales, spanning from supernova explosions (10$^{13}$ m) to inertial confinement fusion (10$^{-6}$ m). In inertial confinement fusion, the RT instability is known to induce mixing or turbulent transition, which in turn cools the hot spot and hinders ignition. The fine-scale features of the RT instability, which are difficult to image in HED physics, may help determine if the system is mixing or is transitioning to turbulence. Earlier diagnostics lacked the spatial and temporal resolution necessary to diagnose the dynamics that occur along the RT structure. A recently developed diagnostic, the Crystal Backlighter Imager (CBI), \cite{Hall:2019, DoZonePlate} can now produce an x-ray radiograph capable of resolving the fine-scale features expected in these RT unstable systems. This paper describes an experimental design that adapts a well-characterized National Ignition Facility (NIF) platform to accommodate the CBI diagnostic. Simulations and synthetic radiographs highlight the resolution capabilities of the CBI in comparison to previous diagnostics. The improved resolution of the system can provide new observations to study the RT instability's involvement in mixing and the transition to turbulence in the HED regime.

[6]  arXiv:2112.00096 [pdf, other]
Title: Coupling to longitudinal modes in spherical thin shells illuminated by submillimeter wave Gaussian beam: applications to corneal sensing
Comments: 21 pages, 12 figures
Subjects: Medical Physics (physics.med-ph); Optics (physics.optics)

Coupling to longitudinal modes of thin spherical shells, under Gaussian-beam illumination, was explored with a theoretical method based on Fourier-optics analysis and vector spherical harmonics. The illumination frequency band was fixed between 100-600 GHz and the outer spherical shell radius of curvature and thickness are 7.5 mm and 0.5 mm, respectively. The shell material was either the lossless cornea or an aqueous effective media representing the cornea. Six different beam-target strategies were introduced being potential candidates for maximum coupling. Two dispersion-tuned beam ensembles with strongly frequency-dependent phase center location have been created with a fixed incident beam 1/e radius and radius of curvature called forward strategies. These computations of different alignments were continued with four beam ensembles of frequency-invariant phase center, constructed from fits to experimental data, oriented at four different axial locations with respect to the spherical shell center of curvature, they are called reverse strategies. Coupling efficiency for all strategies was calculated for different targets including PEC sphere, air-core, and PEC core covered by a cornea loss-free layer and cornea. All scattering strategies contrasted to scattering from equivalent planar targets as a reference with maximum coupling. The results show that, under an ideal calibration, forward strategies are a closer approximation to the plane-wave condition. However, target properties influence the coupling efficiency remarkably for instance the observed difference in cornea scattering is vanishingly small as dielectric loss limits walk-off loss. Furthermore, under perturbed calibration, the forward strategies showed less sensitivity.

[7]  arXiv:2112.00118 [pdf, other]
Title: Impact of the hole orientation of asymmetric GEM foils on the performance of single and triple GEM detectors
Journal-ref: JINST 16 (2021) P10032
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)

The Gas Electron Multiplier (GEM) foil is an amplification stage that has been introduced to overcome the problem of discharges observed in gaseous detectors. There are two major production techniques of GEM foils: double-mask and single-mask etching. Despite being an effective method, an asymmetry is observed between the top and bottom diameters of GEM holes in single mask compared to double mask. In this paper we describe extensive simulations and experimental measurements to study this hole asymmetry and its effect on the performance of GEM based detectors. The experimental data is collected using GEM foils of various hole geometries and orientations. In simulations, the same dimensions are used to study the properties of the detector. Simulations are performed with the Garfield$^{++}$ simulation package along with ANSYS for creating the geometry of the GEM foils as well as the triple-GEM detector and the meshing needed for the field calculations. The simulation results match the observations from experimental measurements. The gains measured with single and triple-GEM detectors are lower if asymmetric foils are oriented with the smaller diameters towards the readout plane. Detailed simulation of the amplification and collection steps indicates that the lower gain is attributed to a loss of electrons at the GEM3 foil for the first time.

[8]  arXiv:2112.00122 [pdf, other]
Title: In situ control of integrated Kerr nonlinearity
Subjects: Optics (physics.optics); Quantum Physics (quant-ph)

Kerr nonlinearity in nanophotonic cavities provides a versatile platform to explore fundamental physical sciences and develop novel photonic technologies. This is driven by the precise dispersion control and significant field enhancement with nanoscale structures. Beyond dispersion and pump engineering, the direct control of Kerr nonlinearity can release the ultimate performance and functionality of photonic systems. Here, we report the in situ control of integrated Kerr nonlinearity through its interplay with the cascaded Pockels nonlinear process. Kerr nonlinearity is tuned over 10~dB dynamic range without modifying photonic structures. Fano resonance is observed with nonlinear spectrum, in contrast to standard linear transmission. This confirms the quantum interference between competing optical nonlinear pathways. Besides nonlinearity enhancement, we also demonstrate the novel capability to suppress the material intrinsic nonlinearity. Finally, we use the tunable nonlinearity to control the spectral brightness and coincidence-to-accidental ratio of single-photon generation. This work paves the way towards the complete nanoscale control of optical nonlinear processes at quantum level.

[9]  arXiv:2112.00136 [pdf, other]
Title: The performance of a new Kuraray wavelength shifting fiber YS-2
Authors: I. Alekseev (1 and 2), M. Danilov (2), V. Rusinov (1), E. Samigullin (1), D. Svirida (1 and 2), E. Tarkovsy (1) ((1) Alikhanov Institute for Theoretical and Experimental Physics NRC "KI", Moscow, Russia, (2) P.N. Lebedev Physical Institute of the Russian Academy of Sciences, Moscow, Russia)
Comments: 7 pages, 8 figures, to be submitted to JINST
Subjects: Instrumentation and Detectors (physics.ins-det)

Wavelength shifting fibers are widely used for light collection from scintillation counters, which allow connection of various scintillation planes to relatively small photocathodes of photodetectors and especially tiny photocathodes of silicon photo-multipliers. In October 2020 Kuraray announced production of a new branch of faster fibers. We performed a comparison of the new fiber YS-2 to a mature Y-11. The fiber YS-2 demonstrated decay time nearly two times shorter than that of Y-11: $\approx$4.0 ns versus $\approx$7.4 ns. At the same time its light yield and attenuation length are as good as of Y-11, which makes YS-2 a good choice for timing scintillation detectors.

[10]  arXiv:2112.00138 [pdf, other]
Title: Laser excitation of the 1s-hyperfine transition in muonic hydrogen
Comments: 25 pages, 10 figures
Subjects: Atomic Physics (physics.atom-ph)

The CREMA collaboration is pursuing a measurement of the ground-state hyperfine splitting (HFS) in muonic hydrogen ($\mu$p) with 1 ppm accuracy by means of pulsed laser spectroscopy to determine the two-photon-exchange contribution with $2\times10^{-4}$ relative accuracy. In the proposed experiment, the $\mu$p atom which undergoes a laser excitation from the singlet hyperfine state to the triplet hyperfine state, is quenched back to the singlet state by an inelastic collision with a H$_2$ molecule. The resulting increase of kinetic energy after the collisional deexcitation is used as a signature of a successful laser transition between hyperfine states. In this paper we calculate the combined probability that a $\mu$p atom initially in the singlet hyperfine state undergoes a laser excitation to the triplet state followed by a collisional-induced deexcitation back to the singlet state. This combined probability has been computed using the optical Bloch equations including the inelastic and elastic collisions. Omitting the decoherence effects caused by collisions would overestimate the transition probability by more than a factor of three. In this paper, we also account for Doppler effects and the laser bandwidth, and provide the matrix element, the saturation fluence, the elastic and inelastic collision rates for the singlet and triplet states, and the resonance linewidth at the conditions relevant for the hyperfine splitting experiment of the CREMA collaboration. This calculation thus quantifies one of the key unknowns of the HFS experiment, leading to a precise definition of the requirements for the laser system and to an optimization of the hydrogen gas target where $\mu$p is formed and the laser spectroscopy will occur.

[11]  arXiv:2112.00144 [pdf, other]
Title: Fully reversible magnetoelectric voltage controlled THz polarization rotation in magnetostrictive spintronic emitters on PMN-PT
Subjects: Applied Physics (physics.app-ph); Materials Science (cond-mat.mtrl-sci)

THz polarization control upon generation is a crucially missing functionality. THz spintronic emitters based on the inverse spin Hall effect allow for this by the strict implicit orthogonality between their magnetization state and the emitted polarization. This control was up till now only demonstrated using cumbersome external magnetic field biasing to impose a polarization direction. We present here for the first time an efficient voltage control of the polarization state of terahertz spintronic emitters. Using a ferromagnetic spin pumping multilayer exhibiting simultaneously strong uniaxial magnetic anisotropy and magnetostriction in a crossed configuration, an emitter is achieved where in principle the stable magnetization direction can be fully and reversibly controlled over a 90$^\circ$ angle span only by an electric voltage. To achieve this, an engineered rare-earth based ferromagnetic multilayer is deposited on a piezoelectric $\textrm{(1-x)[Pb(Mg}_\textrm{0.33}\textrm{Nb}_\textrm{0.66})\textrm{O}_\textrm{3}\textrm{]-x[PbTiO}_\textrm{3}\textrm{]}$ (PMN-PT) substrate. We demonstrate experimentally a reversible 70$^\circ$ THz polarization rotation by sweeping the substrate voltage over 400V. This demonstration allows for a fully THz polarization controlled ISHE spintronic terahertz emitter not needing any control of the magnetic bias.

[12]  arXiv:2112.00146 [pdf, other]
Title: Characterization of 128x128 MM-PAD-2.1 ASIC: A Fast Framing Hard X-Ray Detector with High Dynamic Range
Comments: 16 pages, 7 figures
Subjects: Instrumentation and Detectors (physics.ins-det)

We characterize a new x-ray Mixed-Mode Pixel Array Detector (MM-PAD-2.1) Application Specific Integrated Circuit (ASIC). Using an integrating pixel front-end with dynamic charge removal architecture, the MM-PAD-2.1 ASIC extends the maximum measurable x-ray signal (in 20 keV photon units) to > 10$^{7}$ x-rays/pixel/frame while maintaining a low read noise across the full dynamic range, all while imaging continuously at a frame rate of up to 10 kHz. The in-pixel dynamic charge removal mechanism prevents saturation of the input amplifier and proceeds in parallel with signal integration to achieve dead-time-less measurements with incident x-ray rates of > 10$^{10}$ x-rays/pixel/s. The ASIC format consists of 128$\times$128 square pixels each 150 $\mu$m on a side and is designed to be 3-side buttable so as to tile large arrays. Here we use both laboratory x-ray sources and the Cornell High Energy Synchrotron Source (CHESS) to characterize two single ASIC prototype detectors for both low (single x-ray) and high incident flux detection. In the first detector the ASIC was solder bump-bonded to a 500 $\mu$m thick Si sensor for efficient detection of x-rays below ~20 keV, whereas the second detector used a 750 $\mu$m thick CdTe sensor for x-rays above $\sim$ 20 keV.

[13]  arXiv:2112.00148 [pdf, other]
Title: Topologically protected second-harmonic generation via doubly resonant high-order photonic modes
Comments: 7 pages, 8 figures
Journal-ref: Phys. Rev. B 104, 155421 (2021)
Subjects: Optics (physics.optics); Other Condensed Matter (cond-mat.other)

Topology-driven nonlinear light-matter effects open up new paradigms for both topological photonics and nonlinear optics. Here, we propose to achieve high-efficiency second-harmonic generation in a second-order photonic topological insulator. Such system hosts highly localized topological corner states with large quality factors for both fundamental and second harmonic waves, which could be matched perfectly in frequency by simply tuning the structural parameters. Through the nonlinear interaction of the doubly resonant topological corner states, unprecedented frequency conversion efficiency is predicted. In addition, the robustness of the nonlinear process against defects is also demonstrated. Our work opens up new avenues toward topologically protected nonlinear frequency conversion using high-order photonic topological modes.

[14]  arXiv:2112.00151 [pdf, other]
Title: Dual-Polarization Second-Order Photonic Topological Insulators
Comments: 9 pages, 9 figures
Journal-ref: Phys. Rev. Applied 15, 034053 (2021)
Subjects: Optics (physics.optics); Other Condensed Matter (cond-mat.other)

Second-order photonic topological insulators that host highly localized corner states resilient to defects, are opening new routes towards developing fascinating photonic devices. However, the existing works on second-order photonic topological insulators have mainly focused on either transverse magnetic or transverse electric modes. In this paper, we propose a dual-polarization topological photonic crystal structure for both transverse magnetic and transverse electric modes through topology optimization. Simple tight-binding lattice models are constructed to reveal the topological features of the optimized photonic crystal structure in a transparent way. The optimized dual-polarization second-order photonic topological insulator hosts four groups of corner states with different profiles and eigenfrequencies for both the transverse magnetic and transverse electric modes. Moreover, the robustness of theses corner states against defects is explicitly demonstrated. Our results offer opportunities for developing polarization-independent topological photonic devices.

[15]  arXiv:2112.00157 [pdf]
Title: Measuring the knot of degeneracies and the eigenvalue braids near a third-order exceptional point
Comments: Supplemental Movies S1-S4 are included as ancillary files, or see this http URL
Subjects: Optics (physics.optics); Mesoscale and Nanoscale Physics (cond-mat.mes-hall); Classical Physics (physics.class-ph); Quantum Physics (quant-ph)

When a system of $N$ coupled oscillators is tuned by varying its external control parameters around a closed path (i.e., a "control loop"), the system's spectrum of eigenfrequencies must return to itself. In Hermitian systems this return is trivial, as each eigenfrequency returns to its original value. However, in non-Hermitian systems, where the eigenfrequencies are complex, the spectrum may return to itself in a topologically non-trivial manner, a phenomenon known as spectral flow. The spectral flow is determined by how the control loop encircles degeneracies, and for $N=2$ this relationship is well-understood. Here we extend this description to arbitrary $N$. We show that control loops generically produce braids of eigenfrequencies, and that for $N>2$ these braids' non-commutativity reflects the non-trivial geometry of the space of degeneracies. We demonstrate these features experimentally for $N=3$ using a cavity optomechanical system whose tunability gives access to a third-order exceptional point and all of the spectra in its neighborhood.

[16]  arXiv:2112.00163 [pdf]
Title: Optimization of FLASH Proton Beams Using a Track-Repeating Algorithm
Comments: 15 pages, 7 figures, two tables
Subjects: Medical Physics (physics.med-ph)

Methods: A phase space file in a plane at 202 mm downstream of the beam exit window is generated through tuning parameters to match FDC results with measured or MCNPX Monte Carlo-simulated integrated depth-dose distribution (IDD) and lateral dose profiles. To spread out the Bragg peak, widen the beam and reduce the penumbra, a ridge filter (RF), a high-Z material scatterer and a collimator with compensator are inserted in the beam path and their shapes and sizes have been optimized. The FDC calculations are validated by comparing Geant4 Monte Carlo simulations. In addition, a set of algorithms to automatically choose the optimum dimensions of the beam shaping elements is developed and tested using the same beams. At the last part, dose rates for optimized beams were estimated by scaling their dose distributions to that of their original beams. Results: The optimized 86.4 MeV beam had an 8.5 mm wide spread-out Bragg peak (SOBP) (proximal 90% to distal 90% of the maximum dose), 14.5 mm, 12.0 mm and 11.0 lateral widths with dose above 50%, 80% and 90% respectively and a 2.5 mm penumbra from 80% to 20% in the lateral profile for the energy. The 159.5 MeV beam had a SOBP of 39.0 mm and the lateral widths with dose above 50%, 80% and 90% of 20.5 mm, 15.0 and 12.5 mm when the source to surface distance (SSD) was 550 mm. Wider lateral widths was obtained with increased SSD. The FDC calculations had passing rates higher than 96% using 3mm/3% as the gamma-index criterion comparing with Geant4 simulations for both energies. The set of automatic algorithms can choose the proper dimensions for the high-density scatterer, RF, collimator and compensator efficiently. And the optimized 159.5 MeV beam with different SDDs had entrance dose rate higher than 40 Gy/s if the entrance dose rate of the original beam was 150 Gy/s.

[17]  arXiv:2112.00164 [pdf, other]
Title: A 3D Numerical Investigation into the Effect of Rounded Corner Radii on the Wind Loading of a Square Cylinder Subjected to Supercritical Flow
Subjects: Fluid Dynamics (physics.flu-dyn)

Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many approaches such as modification of the external geometry of structures have been investigated to mitigate wind-induced load. One such proven geometric modification involved rounding of sharp corners. In this work, we systematically analyze the effects of rounded corner radii on the flow-induced loading for a square cylinder. We perform 3-Dimensional (3D) simulations at a high Reynolds number of $Re = 1\times 10^5$ which is more likely to be encountered in practical applications. An Improved Delayed Detached Eddy Simulation (IDDES) formulation is used with the $k-\omega$ Shear Stress Transport (SST) model for near-wall modelling. IDDES is capable of capturing flow accurately at high Reynolds numbers and prevents grid induced separation near the boundary layer. The effects of these corner modifications are analyzed in terms of the resulting mean and fluctuating components of the lift and drag forces compared to a sharp corner case. Plots of the angular distribution of the mean and fluctuating pressure coefficient along the square cylinder's surface illustrate the effects of corner modifications on the different parts of the cylinder. The windward corner's separation angle was observed to decrease with an increase in radius, resulting in a narrower and longer recirculation region. Furthermore, with an increase in radius, a reduction in the fluctuating lift, mean drag, and fluctuating drag coefficients has been observed.

[18]  arXiv:2112.00178 [pdf, ps, other]
Title: How to distinguish between indistinguishable particles
Authors: Michael te Vrugt
Comments: Forthcoming in "The British Journal for the Philosophy of Science"
Subjects: History and Philosophy of Physics (physics.hist-ph); Soft Condensed Matter (cond-mat.soft); Statistical Mechanics (cond-mat.stat-mech)

A long and intense debate in philosophy is concerned with the question whether there can be haecceistic differences between possible worlds, that is, nonqualitative differences that only arise from different de re representations. According to haecceitism, it can give rise to a different situation if the positions of two qualitatively identical particles are exchanged, while according to anti-haecceitism, this is not the case. It has been suggested that classical statistical mechanics might provide evidence for one of these positions. However, most philosophers of physics argue that it does not. In this article, we show that order-preserving dynamics, a novel method from statistical mechanics developed for the description of nonergodic systems, changes this situation: It is intrinsically haecceistic and makes different experimental predictions than non-haecceistic alternatives. Thereby, it provides an empirical argument for the existence of modality de re.

[19]  arXiv:2112.00183 [pdf, other]
Title: Descriptive vs. inferential community detection: pitfalls, myths and half-truths
Authors: Tiago P. Peixoto
Comments: 51 pages, 16 figures
Subjects: Physics and Society (physics.soc-ph); Social and Information Networks (cs.SI); Data Analysis, Statistics and Probability (physics.data-an); Methodology (stat.ME); Machine Learning (stat.ML)

Community detection is one of the most important methodological fields of network science, and one which has attracted a significant amount of attention over the past decades. This area deals with the automated division of a network into fundamental building blocks, with the objective of providing a summary of its large-scale structure. Despite its importance and widespread adoption, there is a noticeable gap between what is considered the state-of-the-art and the methods that are actually used in practice in a variety of fields. Here we attempt to address this discrepancy by dividing existing methods according to whether they have a "descriptive" or an "inferential" goal. While descriptive methods find patterns in networks based on intuitive notions of community structure, inferential methods articulate a precise generative model, and attempt to fit it to data. In this way, they are able to provide insights into the mechanisms of network formation, and separate structure from randomness in a manner supported by statistical evidence. We review how employing descriptive methods with inferential aims is riddled with pitfalls and misleading answers, and thus should be in general avoided. We argue that inferential methods are more typically aligned with clearer scientific questions, yield more robust results, and should be in general preferred. We attempt to dispel some myths and half-truths often believed when community detection is employed in practice, in an effort to improve both the use of such methods as well as the interpretation of their results.

[20]  arXiv:2112.00188 [pdf, other]
Title: Graded arrays of vertical barriers: rainbow reflection and broadband energy absorption
Comments: 21 pages, 8 figures
Subjects: Fluid Dynamics (physics.flu-dyn)

The rainbow reflection effect describes the broadband spatial separation of wave spectral components caused by a spatially graded array of resonators. Although mainly studied in optics and acoustics, this phenomenon has recently been demonstrated both theoretically and experimentally for water waves travelling through an array of vertical cylinders. Linear water wave scattering by a array of vertical, surface-piercing barriers is considered here, in which both the submergence and spacing between the barriers are spatially graded. The rainbow reflection effect arises naturally as wave energy temporarily becomes amplified at different locations depending on frequency. Band diagram calculations are used to demonstrate that this is a consequence of the wave gradually slowing down throughout the array. The wave/barriers scattering problem is then augmented by positioning heave-restricted, rectangular floating bodies equipped with a linear damping mechanism between each adjacent pair of barrier. A solution to the resulting boundary-value problem is obtained using an integral equation/Galerkin method. Using constrained optimisation, passive rainbow absorbers are designed that achieve near-perfect absorption over (i) a discrete set of frequencies, and (ii) over an octave. This suggests potential applications of rainbow absorbers in the design of smart coastal technologies.

[21]  arXiv:2112.00192 [pdf, other]
Title: Stabilizing amplifier with a programmable load line for characterization of nanodevices with negative differential resistance
Subjects: Instrumentation and Detectors (physics.ins-det); Mesoscale and Nanoscale Physics (cond-mat.mes-hall)

Resistive switching devices and other components with negative differential resistance (NDR) are emerging as possible electronic constituents of next-generation computing architectures. Due to the NDR effects exhibited, switching operations are strongly affected by the presence of resistance in series with the memory cell. Experimental measurements useful in the development of these devices use a deliberate addition of series resistance, which can be done either by integrating resistors on-chip or by connecting external components to the wafer probing system. The former approach is considered inflexible because the resistance value attached to a given device cannot be changed or removed, while the latter approach tends to create parasitic effects that impact controllability and interfere with measurements. In this work we introduce a circuit design for flexible characterization of two-terminal nanodevices that provides a programmatically adjustable external series resistance while maintaining low parasitic capacitance. Experimental demonstrations are given that show the impact of the series resistance on NDR and resistive switching measurements.

[22]  arXiv:2112.00196 [pdf]
Title: Luminescence from ZAIS quantum dots: radiative or nonradiative
Comments: 22 pages, 7 figures, includes SI material
Subjects: Optics (physics.optics); Mesoscale and Nanoscale Physics (cond-mat.mes-hall); Materials Science (cond-mat.mtrl-sci)

Quantum dots have found applications across the semiconductor and biotechnology industries, improving energy efficiency, color purity, and imaging capability. However, the standard quantum dot relies on a heavy metal architecture, which has undesirable environmental impacts. Thus, alternative material systems are desirable. One strategy is the ZnS-AgInS2 (ZAIS) quantum dot which has a metal dichalcogenide chemical structure. Unlike heavy metal quantum dots, these nanoparticles luminesce even when defects are present, and their emission wavelength is tuned by varying the relative composition. Past works have linked the source of this luminescence to a defect-assisted transition recombination process, but the precise mechanism is still unclear. In this work, we investigate the physics of this defect-assisted transition by systematically varying the concentration of defects through a simple quick-cool thermal annealing process which provides control over the crystalline disorder of the nanoparticle. Using a combination of ultraviolet photoelectron spectroscopy and fluorescence measurements, information about the nature of the defect-assisted transition is obtained. In contrast to previous work, we find that the ZAIS quantum dot luminescence has an electronic-based rather than defect-assisted transition mechanism.

[23]  arXiv:2112.00201 [pdf]
Title: Spectral Characterization of PVDF Sensor Designs for Acoustic Spectroscopy
Subjects: Instrumentation and Detectors (physics.ins-det)

Polyvinylidene difluoride (PVDF) sensors are of interest to ultrasonic applications due to their high sensitivity and efficient acoustic coupling to the environment. PVDF sensors for scientific applications typically possess a flat frequency response to faithfully reproduce spectral components of an unknown source. However, in industrial sensing applications higher responsivity is desirable even at the cost of decreased flatness in the spectral responsivity. To better understand the trade-offs between intrinsic responsivity and spectral response we examine four PVDF sensor variants for spectral responsivity as a function of thickness and find that increased responsivity is correlated with a strong non-linear frequency dependence.

[24]  arXiv:2112.00215 [pdf, other]
Title: Impact angle control of local intense d$B$/d$t$ variations during shock-induced substorms
Comments: 44 pages, 18 figures, 3 tables
Journal-ref: Published in Space Weather, 2021
Subjects: Space Physics (physics.space-ph); Earth and Planetary Astrophysics (astro-ph.EP); Solar and Stellar Astrophysics (astro-ph.SR)

The impact of interplanetary shocks on the magnetosphere can trigger magnetic substorms that intensify auroral electrojet currents. These currents enhance ground magnetic field perturbations (d$B$/d$t$), which in turn generate geomagnetically induced currents (GICs) that can be detrimental to power transmission infrastructure. We perform a comparative study of d$B$/d$t$ variations in response to two similarly strong shocks, but with one being nearly frontal, and the other, highly inclined. Multi-instrument analyses by the Time History of Events and Macroscale Interactions during Substorms (THEMIS) and Los Alamos National Laboratory spacecraft show that nightside substorm-time energetic particle injections are more intense and occur faster in the case of the nearly head-on impact. The same trend is observed in d$B$/d$t$ variations recorded by THEMIS ground magnetometers. THEMIS all-sky imager data show a fast and clear poleward auroral expansion in the first case, which does not clearly occur in the second case. Strong field-aligned currents computed with the spherical elementary current system (SECS) technique occur in both cases, but the current variations resulting from the inclined shock impact are weaker and slower compared to the nearly frontal case. SECS analyses also reveal that geographic areas with d$B$/d$t$ surpassing the thresholds 1.5 and 5 nT/s, usually linked to high-risk GICs, are larger and occur earlier due to the symmetric compression caused by the nearly head-on impact. These results, with profound space weather implications, suggest that shock impact angles affect the geospace driving conditions and the location and intensity of the subsequent d$B$/d$t$ variations during substorm activity.

[25]  arXiv:2112.00225 [pdf, ps, other]
Title: Layering and vertical transport in sheared double diffusive convection in the diffusive regime
Comments: 23 pages, 12 figures, 1 table
Subjects: Fluid Dynamics (physics.flu-dyn)

A sequence of two and three-dimensional simulations is conducted for the double diffusive convection (DDC) flows in the diffusive regime subjected to an imposed shear. The flow is confined between two horizontal plates which are maintained at different constant temperature, salinity, and different velocity, thus setting up a shear across the flow. The lower plate is fixed at higher temperature and salinity, while the overall (unperturbed) density gradient is statically stable. For a wide range of control parameters, and for sufficiently strong perturbation of the conductive initial state, we find that staircase-like structures spontaneously develop, with relatively well-mixed layers separated by sharp interfaces of enhanced scalar gradient. Such staircases appear to be robust even in the presence of strong shear over very long times, although we typically observe early time coarsening of the number of observed layers. For the same set of control parameters, different asymptotic layered states, with markedly different vertical scalar fluxes, can arise for different initial perturbation structures. The imposed shear does significantly spatio-temporally modify the vertical transport of the various scalars. The flux ratio (i.e., the ratio between the density fluxes due to the total (convective and diffusive) salt flux and the total heat flux) is found, at steady state, to be essentially equal to the square root of the ratio of the salt diffusivity to the thermal diffusivity, consistently with the physical model originally proposed by Linden and Shirtcliffe (1978) and the variational arguments presented by Stern (1982) for unsheared double diffusive convection.

[26]  arXiv:2112.00235 [pdf]
Title: Open-bore vertical MRI scanners generate significantly less RF heating around deep brain stimulation leads compared to horizontal scanners
Authors: Jasmine Vu (1 and 2), Bhumi Bhusal (2), Bach T Nguyen (2), Pia Sanpitak (1 and 2), Elizabeth Nowac (3), Julie Pilitsis (4), Joshua Rosenow (5), Laleh Golestanirad (1,2) ((1) Department of Biomedical Engineering, McCormick School of Engineering, Northwestern University, (2) Department of Radiology, Feinberg School of Medicine, Northwestern University, (3) Illinois Bone and Joint Institute, (4) Department of Neurosciences & Experimental Therapeutics, Albany Medical College, and (5) Department of Neurosurgery, Feinberg School of Medicine, Northwestern University)
Comments: 29 pages, 10 figures
Subjects: Medical Physics (physics.med-ph)

Objectives Studies that assess magnetic resonance imaging (MRI) induced radiofrequency (RF) heating of the tissue in the presence of an active electronic implant are mostly performed in horizontal, closed-bore scanners. Vertical, open-bore MRI systems have a 90{\deg} rotated magnet and generate a fundamentally different RF field distribution in the body, yet little is known about the RF heating of deep brain stimulation (DBS) systems in this class of scanners. Here, we investigated whether RF heating of DBS devices was significantly different in a vertical, open-bore MRI scanner compared to a horizontal, closed-bore MRI scanner. Materials and Methods In this phantom study, RF heating around the lead of a commercial DBS system implanted in an anthropomorphic phantom was evaluated in a 1.2 T vertical open-bore scanner (Oasis, Fujifilm Healthcare) and a 1.5 T horizontal closed-bore scanner (Aera, Siemens Healthineers). DBS devices were implanted following 30 realistic lead trajectories. Electromagnetic simulations were performed to assess the specific absorption rate (SAR) of RF energy around leads with different internal structures. Results When controlling for B1+rms, temperature increase around the lead-tip was significantly lower at the vertical scanner compared to the horizontal scanner (p-value=9.1x10-7). Electromagnetic simulations demonstrated up to a 14-fold reduction in the maximum 0.1g-averaged SAR deposited in the tissue surrounding the lead-tip in a vertical scanner compared to a horizontal scanner for leads with straight and helical internal wires. Conclusions RF experiments and electromagnetic simulations demonstrated consistently lower RF heating and power deposition around the DBS lead-tip at the vertical scanner compared to the horizontal scanner. Our simulation results suggest that this trend in heating may potentially extend to leads from other manufacturers.

[27]  arXiv:2112.00285 [pdf]
Title: Giant moire trapping of excitons in twisted hBN
Comments: 20 pages, 9 pictures
Subjects: Applied Physics (physics.app-ph); Materials Science (cond-mat.mtrl-sci)

Excitons in van der Waals (vdW) stacking interfaces can be trapped in ordered moire potential arrays giving rise to attractive phenomenons of quantum optics and bosonic many-body effects. Compare to the prevalent transition metal dichalcogenides (TMDs) systems, due to the wide bandgap and low dielectric constant, excitons in twist-stacked hexagonal boron nitride (hBN) are anticipated trapped in deeper moire potential, which enhances the strength of interactions. However, constrained by the common low detectivity of weak light-emitting in the deep-ultraviolet (DUV) bands, the moire excitons in twisthBN remain elusive. Here, we report that a remarkable DUV emitting band (peak located at ~260 nm) only emerges at the twisted stacking area of hBN, which is performed by a high collection efficiency and spatially-resolved cathodoluminescence (CL) at room temperature. Significant peak redshifting contrast to defect-bound excitons of bulk hBN indicates the giant trapping effects of moir\'e potential for excitons. The observation of deeply trapped excitons motivates further studies of bosonic strongly correlation physics based on the twist-hBN system.

[28]  arXiv:2112.00325 [pdf, other]
Title: Quantifying Non-Stationarity with Information Theory
Authors: Carlos Granero-Belinchon (IMT Atlantique), Stéphane G. Roux (Phys-ENS), Nicolas B. Garnier (Phys-ENS, CNRS)
Comments: Entropy, MDPI, 2021
Subjects: Data Analysis, Statistics and Probability (physics.data-an); Fluid Dynamics (physics.flu-dyn)

We introduce an index based on information theory to quantify the stationarity of a stochastic process.The index compares on the one hand the information contained in the increment at the time scale $\tau$ of the process at time $t$ with, on the other hand, the extra information in the variable at time $t$ that is not present at time $t-\tau$. By varying the scale $\tau$, the index can explore a full range of scales. We thus obtain a multi-scale quantity that is not restricted to the first two moments of the density distribution, nor to the covariance, but that probes the complete dependences in the process. This index indeed provides a measure of the regularity of the process at a given scale.Not only is this index able to indicate whether a realization of the process is stationary, but its evolution across scales also indicates how rough and non-stationary it is.We show how the index behaves for various synthetic processes proposed to model fluid turbulence, as well as on experimental fluid turbulence measurements.

[29]  arXiv:2112.00353 [pdf]
Title: Measuring ultra-short pulse widths before and after the objective with a home built autocorrelator
Comments: 10 pages, 4 figures
Subjects: Optics (physics.optics)

In multiphoton microscopy, measurements and compression of the laser pulse width at the setup plays an important role in optimizing the fluorescence output with minimal laser power applications. For example, in deep two and three-photon intravital microscopy it is very crucial to have shortest laser pulses for efficient fluorescence excitation with lowest possible laser power at the sample. There are several published experimental methods and techniques for measuring the group delay dispersion and pulse width. Yet, there are practical limitations for their implementation and beam optimization at intravital setups in individual labs or microscope facility. Here, we present a method to construct a portable optical collinear autocorrelator, to probe the beam directly after the objective and at desired place in the beam path to measure the pulse width, and to optimize the pulse width with a pulse compressor. Finally, we demonstrate that the method increases fluorescence excitation efficiency in three-photon microscopy.

[30]  arXiv:2112.00369 [pdf, other]
Title: Soliton self-compression and resonant dispersive wave emission in higher-order modes of a hollow capillary fibre
Comments: 17 pages, 7 figures
Subjects: Optics (physics.optics)

We investigate soliton self-compression and ultraviolet resonant dispersive wave emission in the higher-order modes of a gas-filled hollow capillary fibre. Our simple analytical scaling rules predict shorter required waveguides and different energy scales when moving from the fundamental to higher-order modes. Experimentally, we demonstrate soliton self-compression and ultraviolet dispersive wave emission in the double-lobe LP$_{11}$ mode of an argon-filled hollow capillary fibre, which we excite by coupling into the fibre at oblique incidence. We observe the generation of ultraviolet dispersive waves which are frequency-shifted and more narrowband as compared to fundamental-mode generation due to the stronger modal dispersion, and a suppression of the supercontinuum between the dispersive wave and the pump pulse. With numerical simulations, we confirm the predictions of our scaling rules and find that the use of higher-order modes can suppress photoionisation and plasma effects even while allowing for much higher pulse energy to be used in the self-compression process. Our results add another degree of freedom for the design of hollow-waveguide systems to generate sub-cycle field transients and tuneable ultrashort laser pulses.

[31]  arXiv:2112.00370 [pdf, other]
Title: Research on proton beam spot imaging based on pixelated gamma detector
Subjects: Instrumentation and Detectors (physics.ins-det)

The primary secondary particles from the spallation target of the China Spallation Neutron Source are mainly gammas and neutrons, which are related to the distribution of the incident proton. The reconstruction of proton beam spot could be implemented based on the distribution of secondary particles. The methods of pinhole imaging and Compton imaging are developed by measuring the gamma distribution based on the pixelated detector. The secondary gammas could be detected by the pixelated gamma detector directly. The neutron can be identified by detecting the characteristic (478 keV) $\gamma$-rays from the $^{10}B$(n, $\alpha$) reactions. In order to detect secondary neutrons, a layer of $^{10}B$ converter is added before the pixelated gamma detector. The pixelated gamma detector is sensitive to the characteristic (478 keV) $\gamma$-rays and then the neutron imaging could be achieved based on measuring the distribution of the characteristic gamma.

[32]  arXiv:2112.00376 [pdf, other]
Title: Unveiling triangular correlation of angular deviation in muon scattering tomography by means of GEANT4 simulations
Comments: 5 pages, 3 figures, 1 table, International Workshop on Cosmic-Ray Muography (Muography2021)
Subjects: Instrumentation and Detectors (physics.ins-det); Computational Physics (physics.comp-ph)

The angular deviation commonly represented by the scattering angle generally serves to provide the characteristic discrimination in the muon scattering tomography. The regular procedure to determine the scattering angle comprises the collection of exactly four hit locations in four detector layers among which two top detector layers are utilized to construct the first vector, whereas the second vector is built by using two bottom detector layers. Although this procedure acts to classify the target volumes in the tomographic systems based on the muon scattering, the scattering angle obtained through the usual methodology founded on four detector layers is dubious for not yielding any information about the position of target volume. Nonetheless, the same set of four detector layers also imparts the possibility of splitting the scattering angle into two separate angles by creating a triangular correlation in such a way that the scattering angle is referred to an exterior angle, whereas the separate angles are considered the interior opposite angles that are not neighboring this exterior angle. In this study, we first show that a combination of three detector layers out of four fulfills the calculation of the interior opposite angles. Then, by employing the GEANT4 simulations over our tomographic configuration composed of three plastic scintillators in either section, we demonstrate that the interior opposite angles differ towards the vertical spatial variation, while the exterior angle approximately remains constant, thereby implying a beneficial feature to be used for the image reconstruction purposes.

[33]  arXiv:2112.00385 [pdf, other]
Title: Deep-learning Assisted Extraction of Fluid Velocity from Scalar Signal Transport in a Shallow Microfluidic Channel
Subjects: Fluid Dynamics (physics.flu-dyn)

Precise measurement of flow velocity in microfluidic channels is of importance in microfluidic applications, such as quantitative chemical analysis, sample preparation and drug synthesis. However, simple approaches for quickly and precisely measuring the flow velocity in microchannels are still lacking. Herein, we propose a deep neural networks assisted scalar image velocimetry (DNN-SIV) for quick and precise extraction of fluid velocity in a shallow microfluidic channel with a high aspect ratio, which is a basic geometry for cell culture, from a dye concentration field with spatiotemporal gradients. DNN-SIV is built on physics-informed neural networks and residual neural networks that integrate data of scalar field and physics laws to determine the velocity in the height direction. The underlying enforcing physics laws are derived from the Navier-Stokes equation and the scalar transport equation. Apart from this, dynamic concentration boundary condition is adopted to improve the velocity measurement of laminar flow with small Reynolds Number in microchannels. The proposed DNN-SIV is validated and analyzed by numerical simulations. Compared to integral minimization algorithm used in conventional SIV, DNN-SIV is robust to noise in the measured scalar field and more efficiently allowing real-time flow visualization. Furthermore, the fundamental significance of rational construction of concentration field in microchannels is also underscored. The proposed DNN-SIV in this paper is agnostic to initial and boundary conditions that can be a promising velocity measurement approach for many potential applications in microfluidic chips.

[34]  arXiv:2112.00409 [pdf, other]
Title: Asymmetric topological pumping in nonparaxial photonics
Comments: 17 pages and 3 figures
Subjects: Optics (physics.optics); Classical Physics (physics.class-ph)

The study of topological photonics was initially inspired by the quantum-optical analogy between the Schrodinger equation for electron wave function and the paraxial Helmholtz equation for light. Here, we reveal a novel phenomenon in topological pumping in arrays of nonparaxial optical waveguides, where the quantum-optical analogy becomes no longer valid. We predict theoretically and demonstrate experimentally an unexpected topological pumping when the injected field transfers from one edge of the waveguide arrays to the other edge in the nonreciprocal fashion. Our finding could pave the way to a new field of nonparaxial topological photonics, and it suggests novel topological effects in optics and photonics driven by nonparaxiality.

[35]  arXiv:2112.00438 [pdf]
Title: Pulse induced half rotational resonance with angular dependent total enhancement of multi-dimensional solid-state NMR correlation spectra
Comments: 20 page, 7 figure, supporting information included
Subjects: Chemical Physics (physics.chem-ph)

We demonstrate a new resonance condition that obeys the relation ${\Delta}{\delta} = n{\nu}_{R}/2$, where ${\Delta}{\delta}$ is the chemical shift difference between two homonuclear-coupled spins, ${\nu}_{R}$ is the magic-angle spinning speed and $n$ is an integer. This 'half rotational resonance' recoupling condition is obtained by the application of rotor-synchronous $^{1}$H pulses when protons are dipolar-coupled to the homonuclear spins. We suggest a new experimental scheme entitled 'pulse induced resonance with angular dependent total enhancement' (PIRATE) that can enhance proton-driven spin diffusion by the application of a single $^{1}$H pulse every rotor period. This scheme can be utilised to obtain homonuclear correlations in multidimensional solid state NMR experiments. Experimental evidence is demonstrated on the two carbons of glycine and is supported by numerical simulations.

[36]  arXiv:2112.00458 [pdf, other]
Title: Metamaterials of Fluids of Light and Sound
Comments: 20 pages, 12 figures
Subjects: Optics (physics.optics); Other Condensed Matter (cond-mat.other)

Phonons, the quanta of vibrations, determine equilibrium and dynamical properties of matter, their material phase and thermal and electronic transport. GHz coherent phonons can interact with and act as interconnects of a wide range of quantum systems. Harnessing and tailoring their coupling to opto-electronic excitations thus becomes a challenge for engineered materials relevant for quantum technologies. With this perspective we introduce polaromechanical metamaterials, two-dimensional arrays of $\mu$m-size zero-dimensional traps confining light-matter polariton fluids and GHz phonons. These metamaterials integrate strongly interacting phonon-polariton oscillators at the lattice sites with inter-site coupling mediated by optomechanical interactions, with remarkable consequences for the lattice dynamics. When locally perturbed by optical excitation, they respond locking the energy detuning between neighbor sites at integer multiples of the phonon quantum, evidencing synchronization blockade and a collective behaviour of the polariton and phonon fields. These results open the path for the coherent control of quantum light fluids with hypersound in a scalable platform.

[37]  arXiv:2112.00462 [pdf, other]
Title: Internal nonlinear transmission in an Yb mode-locked fiber laser through bifurcations
Comments: 15 pages, 5 figures
Journal-ref: Optics Communications, vol. 461 p. 125154 (2020)
Subjects: Optics (physics.optics); Pattern Formation and Solitons (nlin.PS)

Mode-locked fiber lasers are rich dynamical systems that may present several different types of pulsed operating modes, depending on external control parameters such as pump power. A systematic experimental characterization of such regimes is a challenging problem. Here single pulse regimes of ytterbium mode-locked fiber laser are explored and related to the nonlinear amplitude modulation affecting the pulses inside the laser cavity. To understand the full dynamics of this system, average power measurements (slow time scale) have been performed and compared to simultaneous time-resolved measurements (fast time scale). The average nonlinear transmission resulting from the amplitude modulation is measured, allowing to relate the transitions between dynamical regimes to the system's nonlinearity.

[38]  arXiv:2112.00474 [pdf, other]
Title: Analysis of the nonlinear dynamics of a chirping-frequency Alfvén mode in a Tokamak equilibrium
Comments: 49 pages, 33 figures
Subjects: Plasma Physics (physics.plasm-ph)

Chirping Alfv\'en modes are considered as potentially harmful for the confinement of energetic particles in burning Tokamak plasmas. In this paper, the nonlinear evolution of a single-toroidal-number chirping mode is analysed by numerical particle simulation. This analysis can be simplified if the different resonant phase-space structures can be investigated as isolated ones. In our simulations, we adopt as constants of motion, the magnetic momentum, and the initial particle coordinates. The analysis is focused on the dynamics of two of them: namely, those yielding the largest drive during, respectively, the linear phase and the nonlinear one. It is shown that, for each resonant structure, a density-flattening region is formed around the respective resonance radius, with radial width that increases as the mode amplitude grows. It is delimited by two large negative density gradients, drifting inward and outward. If the mode frequency were constant, this density flattening would be responsible for the exhausting of the drive yielded by the resonant structure, which would occur as the large negative density gradients leave the resonance region. causes the resonance radius and the resonance region to drift inward. This drift, along with a relevant resonance broadening, delays the moment in which the inner density gradient reaches the inner boundary of the resonance region, leaving it. On the other side, the island reconstitutes around the new resonance radius; as a consequence, the large negative density gradient further moves inward. This process continues as long as it allows to keep the large gradient within the resonance region. When this is no longer possible, the resonant structure ceases to be effective in driving the mode. To further grow, the mode has to tap a different resonant structure, possibly making use of additional frequency variations.

[39]  arXiv:2112.00482 [pdf, other]
Title: Energy Redistribution following CO$_2$ Formation on Cold Amorphous Solid Water
Comments: 25 pages
Subjects: Chemical Physics (physics.chem-ph)

The formation of molecules in and on amorphous solid water (ASW) as it occurs in interstellar space releases appreciable amounts of energy that need to be dissipated to the environment. Here, energy transfer between CO$_2$ formed within and on the surface of amorphous solid water (ASW) and the surrounding water is studied. Following CO($^1 \Sigma^+$) + O($^1$D) recombination the average translational and internal energy of the water molecules increases on the $\sim 10$ ps time scale by 15 % to 20 % depending on whether the reaction takes place on the surface or in an internal cavity of ASW. Due to tight coupling between CO$_2$ and the surrounding water molecules the internal energy exhibits a peak at early times which is present for recombination on the surface but absent for the process inside ASW. Energy transfer to the water molecules is characterized by a rapid $\sim 10$ ps and a considerably slower $\sim 1$ ns component. Within 50 ps a mostly uniform temperature increase of the ASW across the entire surface is found. The results suggest that energy transfer between a molecule formed on and within ASW is efficient and helps to stabilize the products generated.

[40]  arXiv:2112.00505 [pdf, other]
Title: Simulating X-ray Photoelectron Spectra With Strong Electron Correlation Using Multireference Algebraic Diagrammatic Construction Theory
Subjects: Chemical Physics (physics.chem-ph)

We present a new theoretical approach for the simulations of X-ray photoelectron spectra of strongly correlated molecular systems that combines multireference algebraic diagrammatic construction theory (MR-ADC) [J. Chem. Phys., 2018, 149, 204113] with core-valence separation (CVS) technique. The resulting CVS-MR-ADC approach has a low computational cost while overcoming many challenges of the conventional multireference theories associated with the calculations of excitations from inner-shell and core molecular orbitals. Our results demonstrate that the CVS-MR-ADC methods are as accurate as single-reference ADC approximations for predicting core ionization energies of weakly-correlated molecules, but are more accurate and reliable for systems with multireference character, such as ozone and isomers of benzyne diradical. We also highlight the importance of multireference effects for the description of core-hole screening that determines the relative spacing and order of peaks in the XPS spectra of strongly correlated systems.

[41]  arXiv:2112.00521 [pdf]
Title: A scatter correction method for Multi-MeV Flash Radiography
Subjects: Applied Physics (physics.app-ph)

Multi-MeV flash radiography is often used as the primary diagnostic technique for high energy and density (HED) physics experiments. Primary X-ray which is attenuated by the object offers density information of the object. For a thick metal object with area density as high as 150 g/cm2, the rest part of primary X-ray which passes through the object may drowned in scattered X-ray fog. It seriously limits accuracy of density quantification. In this research, an online scatter estimation method is newly designed which can be easily arranged by putting an additional slit collimator downstream of the general X-ray radiography layout. The basic ideal of this method is that the proportion of scatter and primary x-ray will be changed a lot when x-ray passes through a slit like collimation, then scatter component is solvable with known the collimation performance of the silt on scatter and primary x-ray. Monte Carlo simulation shows that, with this method, evaluation error of average scatter is less than 2% when object area density is as high as 200 g/cm2. In addition to the average scatter, an accelerated Monte Carlo method is developed to obtain scatter distribution in iterative reconstruction. By employing the Genetic algorithm as an optimizer, reconstruction can be done by searching a density which projection with scatter best matches experimental result. This reconstruction method requires neither a priori-knowledge such as mass restriction nor regularization. Simulations show that for France Test Object (FTO), the error of reconstructed density is less than 2%, and uncertainty basically covers the real density.

[42]  arXiv:2112.00528 [pdf]
Title: Objective assessment of corneal transparency in the clinical setting with standard SD-OCT devices
Comments: 15 pages, 7 figures, 1 table
Subjects: Medical Physics (physics.med-ph); Image and Video Processing (eess.IV)

PURPOSE: To develop an automated algorithm allowing extraction of quantitative corneal transparency parameters from clinical spectral-domain OCT images. To establish a representative dataset of normative transparency values from healthy corneas.
METHODS: SD-OCT images of 83 normal corneas (ages 22-50 years) from a standard clinical device (RTVue-XR Avanti, Optovue Inc.) were processed. A pre-processing procedure is applied first, including a derivative approach and a PCA-based correction mask, to eliminate common central artifacts (i.e., apex-centered column saturation artifact and posterior stromal artifact) and enable standardized analysis. The mean intensity stromal-depth profile is then extracted over a 6-mm-wide corneal area and analyzed according to our previously developed method deriving quantitative transparency parameters related to the physics of light propagation in tissues, notably tissular heterogeneity (Birge ratio; $B_r$), followed by the photon mean-free path ($l_s$) in homogeneous tissues (i.e., $B_r \sim 1$).
RESULTS: After confirming stromal homogeneity ($B_r < 10$, IDR: 1.9-5.1), we measured a median $l_s$ of 570 $\mu$m (IDR: 270-2400 $\mu$m). Considering corneal thicknesses, this may be translated into a median fraction of transmitted (coherent) light $T_{coh(stroma)}$ of 51$\%$ (IDR: 22-83$\%$). No statistically significant correlation between transparency and age or thickness was found.
CONCLUSIONS: Our algorithm provides robust and quantitative measurement of corneal transparency from standard clinical SD-OCT images. It yields lower transparency values than previously reported, which may be attributed to our method being exclusively sensitive to spatially coherent light. Excluding images with central artifacts wider than 300 $\mu$m also raises our median $T_{coh(stroma)}$ to 70$\%$ (IDR: 34-87$\%$).

[43]  arXiv:2112.00536 [pdf, other]
Title: Unraveling diffusion kinetics of honeycomb structured Na$_2$Ni$_2$TeO$_6$ as a high-potential and stable electrode for sodium-ion batteries
Comments: submitted
Subjects: Chemical Physics (physics.chem-ph); Materials Science (cond-mat.mtrl-sci)

In search of the potential cathode materials for sodium-ion batteries and to understand the diffusion kinetics, we report the detailed analysis of electrochemical investigation of honeycomb structured Na$_{2}$Ni$_{2}$TeO$_{6}$ material using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), galvanostatic charge-discharge (GCD) and galvanostatic intermittent titration technique (GITT). We found the discharge capacities of 82 and 77 mAhg$^{-1}$ at 0.05~C and 0.1~C current rates, respectively, and the mid-working potential of $\approx$3.9~V at 1~C and high capacity retention of 80\% after 500 cycles at 0.5~C as well as excellent rate capability. The analysis of CV data at different scan rates reveals the pseudo-capacitive mechanism of sodium-ion storage. Interestingly, the {\it in-situ} EIS measurements show a systematic change in the charge-transfer resistance at different charge/discharge stages as well as after different number of cycles. The diffusion coefficient extracted using CV, EIS and GITT lies mainly in the range of 10$^{-10}$ to 10$^{-12}$ cm$^{2}$s$^{-1}$ and the de-insertion/insertion of Na$^+$-ion concentration during electrochemical cycling is consistent with the ratio of Ni$^{3+}$/Ni$^{2+}$ valence state determined by photoemission study. Moreover, the post-cyclic results of retrieved active material show very stable structure and morphology even after various charge-discharge cycles. Our detailed electrochemical investigation and diffusion kinetics studies establish the material as a high working potential and long life electrode for sodium-ion batteries.

[44]  arXiv:2112.00537 [pdf, other]
Title: Extracting single- and multiple-scattering components in laser speckle contrast imaging of tissue blood flow
Subjects: Medical Physics (physics.med-ph)

Random matrix theory provides new insights into multiple scattering in random media. In a recent study, we demonstrated the statistical separation of single- and multiple-scattering components based on a Wishart random matrix. The first- and second-order moments were estimated through a Wishart random matrix constructed using dynamically-backscattered speckle images. In this study, this new strategy was applied to laser speckle contrast imaging (LSCI) of in-vivo blood flow. The random matrix-based method was adapted and parameterized using electric field Monte Carlo simulations and in-vitro blood flow phantom experiments. The new method was further applied in in-vivo experiments, demonstrating the benefits of separating the single- and multiple-scattering components, and was compared with the traditional temporal LASCA method. More specifically, the new method captures stimulus-induced functional changes in blood flow and tissue perfusion in the superficial and deeper layers. The new method extends the ability of LSCI to image functional and pathological changes.

[45]  arXiv:2112.00561 [pdf, other]
Title: Optimization of the Gain Layer Design of Ultra-Fast Silicon Detectors
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)

The defining feature of Ultra-Fast Silicon Detectors (UFSD) is their gain layer design. In this paper, the performance of several types of gain layers, measured with a telescope instrumented with a $^{90}$Sr $\beta$-source, are reported. The sensors measured are produced by Fondazione Bruno Kessler (FBK) and by Hamamatsu Photonics (HPK). The FBK sensors feature three different gain layer designs, with boron and carbon co-implantation, and three sensor thicknesses (35, 45, and 55 $\mu$m), while the HPK sensors have two different gain layer designs (not carbonated) and two thicknesses (45 and 80 $\mu$m).
The design yielding the best results, both when new and irradiated, is an FBK 45 $\mu$m-thick sensor with a carbonated deep gain layer where the carbon and the boron implants are annealed concurrently with a low thermal load. Exploiting the variety of designs presented in these productions, several additional studies on the UFSD working principles have also been performed.

[46]  arXiv:2112.00581 [pdf, other]
Title: Using deep generative neural networks to account for model errors in Markov chain Monte Carlo inversion
Comments: Original publication: Geophys. J. Int., 23 September 2021
Journal-ref: Geophysical Journal International, 228(2), 1098-1118 (2021)
Subjects: Geophysics (physics.geo-ph)

Most geophysical inverse problems are nonlinear and rely upon numerical forward solvers involving discretization and simplified representations of the underlying physics. As a result, forward modeling errors are inevitable. In practice, such model errors tend to be either completely ignored, which leads to biased and over-confident inversion results, or only partly taken into account using restrictive Gaussian assumptions. Here, we rely on deep generative neural networks to learn problem-specific low-dimensional probabilistic representations of the discrepancy between high-fidelity and low-fidelity forward solvers. These representations are then used to probabilistically invert for the model error jointly with the target geophysical property field, using the computationally-cheap, low-fidelity forward solver. To this end, we combine a Markov-chain-Monte-Carlo (MCMC) inversion algorithm with a trained convolutional neural network of the spatial generative adversarial network (SGAN) type, whereby at each MCMC step, the simulated low-fidelity forward response is corrected using a proposed model-error realization. Considering the crosshole ground-penetrating radar traveltime tomography inverse problem, we train SGAN networks on traveltime discrepancy images between: (1) curved-ray (high fidelity) and straight-ray (low fidelity) forward solvers; and (2) finite-difference-time-domain (high fidelity) and straight-ray (low fidelity) forward solvers. We demonstrate that the SGAN is able to learn the spatial statistics of the model error and that suitable representations of both the subsurface model and model error can be recovered by MCMC. In comparison with inversion results obtained when model errors are either ignored or approximated by a Gaussian distribution, we find that our method has lower posterior parameter bias and better explains the observed traveltime data.[...]

[47]  arXiv:2112.00606 [pdf, other]
Title: Cross-Correlated Motions in Azidolysozyme
Subjects: Chemical Physics (physics.chem-ph); Biological Physics (physics.bio-ph)

The changes in the local and global dynamics of azide-labelled Lysozyme compared with that of the wild type protein are quantitatively assessed for all alanine residues along the polypeptide chain. Although attaching -N$_3$ to alanine residues has been considered to be a minimally invasive change in the protein it is found that depending on the location of the Alanine residue the local and global changes in the dynamics differ. For Ala92 the change in the cross correlated motions are minimal whereas attaching -N$_3$ to Ala90 leads to pronounced differences in the local and global correlations as quantified by cross correlation coefficients of the C$_{\alpha}$ atoms. It is also demonstrated that the spectral region of the asymmetric azide stretch distinguishes between alanine attachment sites whereas changes in the low frequency, far-infrared region are less characteristic.

[48]  arXiv:2112.00623 [pdf, ps, other]
Title: A Dynamic Film Model of the Pulsating Heat Pipe
Authors: Vadim Nikolayev (SPEC, CEA)
Journal-ref: Journal of Heat Transfer, American Society of Mechanical Engineers, 2011, 133 (8)
Subjects: Fluid Dynamics (physics.flu-dyn); Classical Physics (physics.class-ph)

This article deals with the numerical modeling of the pulsating heat pipe (PHP) and is based on the film evaporation/condensation model recently applied to the single-bubble PHP (Das et al., 2010, "Thermally Induced Two-Phase Oscillating Flow Inside a Capillary Tube," Int. J. Heat Mass Transfer, 53(19--20), pp. 3905--3913). The described numerical code can treat the PHP of an arbitrary number of bubbles and branches. Several phenomena that occur inside the PHP are taken into account: coalescence of liquid plugs, film junction or rupture, etc. The model reproduces some of the experimentally observed regimes of functioning of the PHP such as chaotic or intermittent oscillations of large amplitudes. Some results on the PHP heat transfer are discussed.

[49]  arXiv:2112.00628 [pdf, other]
Title: Wealth distribution in villages. Transition from socialism to capitalism in view of exhaustive wealth data and a master equation approach
Comments: 17 pages, 6 figures, 7 Tables, Latex
Subjects: Physics and Society (physics.soc-ph)

Socio-economic inequalities derived from an exhaustive wealth distribution is studied in a closed geographical region from Transylvania (Romania). Exhaustive wealth data is computed from the agricultural records of the Sancraiu commune for three different economic situations. The gathered data is spanning two different periods from the communist economy and the present situation after 31 years of free market economy in Romania. The local growth and reset model based on an analytically solvable master equation is used to describe the observed data. The model with realistically chosen growth and reset rates is successful in describing both the experimentally observed distributions and the inequality indexes (Lorenz curve, Gini coefficient and Pareto point) derived from this data. The observed changes in these inequality measures are discussed in the context of the relevant socio-economic conditions.

[50]  arXiv:2112.00652 [pdf, other]
Title: Graph neural networks for fast electron density estimation of molecules, liquids, and solids
Comments: 32 pages, 8 figures
Subjects: Computational Physics (physics.comp-ph); Machine Learning (stat.ML)

Electron density $\rho(\vec{r})$ is the fundamental variable in the calculation of ground state energy with density functional theory (DFT). Beyond total energy, features in $\rho(\vec{r})$ distribution and modifications in $\rho(\vec{r})$ are often used to capture critical physicochemical phenomena in functional materials and molecules at the electronic scale. Methods providing access to $\rho(\vec{r})$ of complex disordered systems with little computational cost can be a game changer in the expedited exploration of materials phase space towards the inverse design of new materials with better functionalities. We present a machine learning framework for the prediction of $\rho(\vec{r})$. The model is based on equivariant graph neural networks and the electron density is predicted at special query point vertices that are part of the message passing graph, but only receive messages. The model is tested across multiple data sets of molecules (QM9), liquid ethylene carbonate electrolyte (EC) and LixNiyMnzCo(1-y-z)O2 lithium ion battery cathodes (NMC). For QM9 molecules, the accuracy of the proposed model exceeds typical variability in $\rho(\vec{r})$ obtained from DFT done with different exchange-correlation functional and show beyond the state of the art accuracy. The accuracy is even better for the mixed oxide (NMC) and electrolyte (EC) datasets. The linear scaling model's capacity to probe thousands of points simultaneously permits calculation of $\rho(\vec{r})$ for large complex systems many orders of magnitude faster than DFT allowing screening of disordered functional materials.

[51]  arXiv:2112.00667 [pdf, other]
Title: Lagrangian Manifestation of Anomalies in Active Turbulence
Comments: 10 pages, 5 Figures
Subjects: Fluid Dynamics (physics.flu-dyn); Soft Condensed Matter (cond-mat.soft); Chaotic Dynamics (nlin.CD)

We show that Lagrangian measurements in active turbulence bear imprints of turbulent and anomalous streaky hydrodynamics leading to a self-selection of persistent trajectories - Levy walks - over diffusive ones. This emergent dynamical heterogeneity results in a super-diffusive first passage distribution which could lead to biologically advantageous motility. We then go beyond single-particle statistics to show that for the pair-dispersion problem as well, active flows are at odds with inertial turbulence. Our study, we believe, will readily inform experiments in establishing the extent of universality of anomalous behaviour across a variety of active flows.

[52]  arXiv:2112.00669 [pdf, other]
Title: Propensity rules for photoelectron circular dichroism in strong field ionization of chiral molecules
Comments: 14 pages, 4 figures
Subjects: Atomic Physics (physics.atom-ph)

Chiral molecules ionized by circularly polarized fields produce a photoelectron current orthogonal to the polarization plane. This current has opposite directions for opposite enantiomers and provides an extremely sensitive probe of molecular handedness. Recently, such photoelectron currents have been measured in the strong-field ionization regime, where they may serve as an ultrafast probe of molecular chirality. Here we provide a mechanism for the emergence of such strong-field photoelectron currents in terms of two propensity rules that link the properties of the initial electronic chiral state to the direction of the photoelectron current.

[53]  arXiv:2112.00671 [pdf, other]
Title: Inferring a property of a large system from a small number of samples
Comments: 15 pages, 3 figures
Subjects: Data Analysis, Statistics and Probability (physics.data-an); Statistical Mechanics (cond-mat.stat-mech); Mathematical Physics (math-ph)

Inferring the value of a property of a large stochastic system is a difficult task when the number of samples is insufficient to reliably estimate the probability distribution. The Bayesian estimator of the property of interest requires the knowledge of the prior distribution, and in many situations, it is not clear which prior should be used. Several estimators have been developed so far, in which the proposed prior was individually tailored for each property of interest; such is the case, for example, for the entropy, the amount of mutual information, or the correlation between pairs of variables. In this paper we propose a general framework to select priors, valid for arbitrary properties. We first demonstrate that only certain aspects of the prior distribution actually affect the inference process. We then expand the sought prior as a linear combination of a one-dimensional family of indexed priors, each of which is obtained through a maximum entropy approach with constrained mean value of the property under study. In many cases of interest, only one or very few components of the expansion turn out to contribute to the Bayesian estimator, so it is often valid to only keep a single component. The relevant component is selected by the data, so no handcrafted priors are required. We test the performance of this approximation with a few paradigmatic examples, and show that it performs well in comparison to the ad-hoc methods previously proposed in the literature. Our method highlights the connection between Bayesian inference and equilibrium statistical mechanics, since the most relevant component of the expansion can be argued to be the one with the right temperature.

[54]  arXiv:2112.00689 [pdf]
Title: Proton dynamics in water confined at the interface of the graphene-MXene heterostructure
Authors: Lihua Xu, De-en Jiang
Comments: The article has been accepted by Journal of Chemical Physics
Subjects: Chemical Physics (physics.chem-ph); Materials Science (cond-mat.mtrl-sci)

Heterostructures of 2D materials offer a fertile ground to study ion transport and charge storage. Here we employ ab initio molecular dynamics to examine the proton-transfer/diffusion and redox behavior in a water layer confined in the graphene-Ti3C2O2 heterostructure. We find that in comparison with the similar interface of water confined between Ti3C2O2 layers, proton redox rate in the dissimilar interface of graphene-Ti3C2O2 is much higher, owning to the very different interfacial structure as well as the interfacial electric field induced by an electron transfer in the latter. Water molecules in the dissimilar interface of the graphene-Ti3C2O2 heterostructure form a denser hydrogen-bond network with a preferred orientation of water molecules, leading to an increase of proton mobility with proton concentration in the graphene-Ti3C2O2 interface. As the proton concentration further increases, proton mobility deceases, due to increasingly more frequent surface redox events that slow down proton mobility due to binding with surface O atoms. Our work provides important insights into how the dissimilar interface and their associated interfacial structure and properties impact proton transfer and redox in the confined space.

Cross-lists for Thu, 2 Dec 21

[55]  arXiv:2109.15046 (cross-list from math.OC) [pdf, other]
Title: An Elo-type rating model for players and teams of variable strength
Comments: 19 pages, 6 figures
Subjects: Optimization and Control (math.OC); Analysis of PDEs (math.AP); Adaptation and Self-Organizing Systems (nlin.AO); Physics and Society (physics.soc-ph)

The Elo rating system, which was originally proposed by Arpad Elo for chess, has become one of the most important rating systems in sports, economics and gaming nowadays. Its original formulation is based on two-player zero-sum games, but it has been adapted for team sports and other settings.
In 2015, Junca and Jabin proposed a kinetic version of the Elo model, and showed that under certain assumptions the ratings do converge towards the players' strength. In this paper we generalise their model to account for variable performance of individual players or teams. We discuss the underlying modelling assumptions, derive the respective formal mean-field model and illustrate the dynamics with computational results.

[56]  arXiv:2112.00008 (cross-list from nucl-th) [pdf, other]
Title: New level of precision in study of neutron beta-decay -- Theoretical basics and experimental backgrounds
Authors: V.V. Vasiliev
Comments: 17 pages, no figures, 17 references
Subjects: Nuclear Theory (nucl-th); Data Analysis, Statistics and Probability (physics.data-an)

The article provides a theoretical substantiation for a significant increase in the level of accuracy in determining the neutron lifetime using an alternative concept of neutron beta decay. Neutrons are distributed among different subsets depending on the sign of the scalar product of the neutron spin vector and momentum of the emitted electron during decay. Therefore, the neutron lifetime can be determined separately for each of the subsets as the inverse frequency of its decay, which is to be averaged over the number of neutrons in this subset. The total neutron lifetime on the total set of neutrons is calculated by averaging the partial (basic) lifetimes, considering their weights. The weights of the basic lifetimes are calculated for two weighing methods, leading, respectively, to the so-called lifetime of "nonpolarized" neutrons, the weighted average lifetime of neutrons and the central lifetime, i.e. the arithmetic mean for the basic lifetimes of neutrons. The dependence between different average neutron lifetimes through the integral asymmetry parameter calculated by using known experimental data leads to simple analytical expressions. The numerical estimate of the weighted average neutron lifetime gives a value that is in good agreement with the results of well-known experiments, which proves the validity of the proposed concept of neutron beta decay. This article includes necessary conditions for a new experiment to bring the neutron lifetime determination to a new level of accuracy.

[57]  arXiv:2112.00112 (cross-list from eess.SP) [pdf]
Title: Vicinity Effects of Field Free Point on the Relaxation Behavior of MNPs
Subjects: Signal Processing (eess.SP); Medical Physics (physics.med-ph)

In Magnetic Particle Imaging (MPI), the distribution of magnetic nanoparticles (MNPs) is imaged by moving a field free point (FFP) in space. All MNPs in close vicinity of the FFP contribute to the signal induced on the receive coil. The relaxation behavior of these MNPs are subject to a DC field due to the selection field (SF). In this work, we investigate the effects of the DC field on the relaxation behavior of the MNPs, with the goal of understanding the differences between the measured relaxations in Magnetic Particle Spectrometer (MPS) setups vs. MPI scanners.

[58]  arXiv:2112.00140 (cross-list from astro-ph.EP) [pdf]
Title: Constraints on the production of phosphine by Venusian volcanoes
Comments: The paper expands on and confirms the results of Bains et al. 2021 arXiv:2009.06499 and provides further constrains on the model of the production of phosphine on Venus proposed by Truong and Lunine this https URL
Subjects: Earth and Planetary Astrophysics (astro-ph.EP); Geophysics (physics.geo-ph)

The initial reports of the presence of phosphine in the cloud decks of Venus has led to the suggestion that volcanism was the source of phosphine, through volcanic phosphides ejected into the clouds. Here we examine the idea that mantle plume volcanism, bringing material from the deep mantle to the surface, could generate observed amounts of phosphine through interaction of explosively erupted phosphide with sulfuric acid clouds. Direct eruption of deep mantle phosphide is unphysical, but shallower material could contain traces of phosphide, and could be erupted to the surface. Explosive eruption that efficiently transported material to the clouds would require ocean:magma interactions or subduction of hydrated oceanic crust, neither of which occur on modern Venus. The transport of erupted material to altitudes coinciding with the observations of phosphine is consequently very inefficient. Using the model proposed by Truong and Lunine as a base case, we estimate that an eruption volume of at least 21,600 km3/year would be required to explain the presence of 1 ppb phosphine in the clouds. This is greater than any historical terrestrial eruption rate, and would have several detectable consequences for remote and in situ observations to confirm. More realistic lithospheric chemistry or atmospheric photochemistry require even more volcanism.

[59]  arXiv:2112.00243 (cross-list from cond-mat.soft) [pdf]
Title: Electric Field Induced Macroscopic Cellular Phase of Nanoparticles
Comments: 25 pages, 14 figures
Subjects: Soft Condensed Matter (cond-mat.soft); Fluid Dynamics (physics.flu-dyn)

A suspension of nanoparticles with very low volume fraction is found to assemble into a macroscopic cellular phase under the collective influence of AC and DC voltages. Systematic study of this phase transition shows that it was the result of electrophoretic assembly into a two-dimensional configuration followed by spinodal decomposition into particle-rich walls and particle-poor cells mediated principally by electrohydrodynamic flow. This mechanistic understanding reveals two characteristics needed for a cellular phase to form, namely 1) a system that is considered two dimensional and 2) short-range attractive, long-range repulsive interparticle interactions. In addition to determining the mechanism underpinning the formation of the cellular phase, this work presents a method to reversibly assemble microscale continuous structures out of nanoscale particles in a manner that may enable the creation of materials that impact diverse fields including energy storage and filtration.

[60]  arXiv:2112.00252 (cross-list from astro-ph.IM) [pdf, other]
Title: Laser guide star return-flux gain from frequency chirping
Subjects: Instrumentation and Methods for Astrophysics (astro-ph.IM); Optics (physics.optics)

Spectral hole burning reduces sodium laser guide star efficiency. Due to photon recoil, atoms that are initially resonant with the single-frequency laser get Doppler shifted out of resonance, which reduces the return flux. Frequency-chirped (also known as frequency-swept) continuous-wave lasers have the potential to mitigate the effect of spectral hole burning and even increase the laser guide star efficiency beyond the theoretical limit of a single-frequency laser. On-sky measurements of a frequency-chirped, single-frequency laser guide star are performed at the Roque de los Muchachos Observatory on La Palma. In the experiment, a 35-cm telescope and a fast photon counting receiver system are employed to resolve the return flux response during laser frequency sweeps gaining insights into the population dynamics of the sodium layer. At a launched laser power of 16.5 W, we find a maximum gain in return flux of 22\% compared to a fixed-frequency laser. Our results suggest a strong dependence of chirping gain on power density at the mesosphere, i.e. laser power and seeing. Maximum gains are recorded at a chirping amplitude on the order of 150 MHz and a chirping rate of 0.8 MHz $\mu$s$^{-1}$, as predicted by theory. Time-resolved measurements during the chirping period confirm our understanding of the population dynamics in the sodium layer. To our knowledge these are the first measurements of return flux enhancement for laser guide stars excited by a single frequency-chirped continuous-wave laser. For higher laser powers, the effectiveness of chirping is expected to increase, which could be highly beneficial for telescopes equipped with high-power laser guide star adaptive optics systems, also for emerging space awareness applications using laser guide stars such as satellite imaging and ground-to-space optical communications.

[61]  arXiv:2112.00299 (cross-list from cs.IT) [pdf, ps, other]
Title: STAR-RISs: A Correlated T&R Phase-Shift Model and Practical Phase-Shift Configuration Strategies
Comments: 31 pages, 9 figures, submitted to IEEE journals for possible publication
Subjects: Information Theory (cs.IT); Signal Processing (eess.SP); Applied Physics (physics.app-ph)

A correlated transmission and reflection (T&R) phase-shift model is proposed for passive lossless simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs). A STAR-RIS-aided two-user downlink communication system is investigated for both orthogonal multiple access (OMA) and non-orthogonal multiple access (NOMA). To evaluate the impact of the correlated T&R phase-shift model on the communication performance, three phase-shift configuration strategies are developed, namely the primary-secondary phase-shift configuration (PS-PSC), the diversity preserving phase-shift configuration (DP-PSC), and the T/R-group phase-shift configuration (TR-PSC) strategies. Furthermore, we derive the outage probabilities for the three proposed phase-shift configuration strategies as well as for those of the random phase-shift configuration and the independent phase-shift model, which constitute performance lower and upper bounds, respectively. Then, the diversity order of each strategy is investigated based on the obtained analytical results. It is shown that the proposed DP-PSC strategy achieves full diversity order simultaneously for users located on both sides of the STAR-RIS. Moreover, power scaling laws are derived for the three proposed strategies and for the random phase-shift configuration. Numerical simulations reveal a performance gain if the users on both sides of the STAR-RIS are served by NOMA instead of OMA. Moreover, it is shown that the proposed DP-PSC strategy yields the same diversity order as achieved by STAR-RISs under the independent phase-shift model and a comparable power scaling law with only 4 dB reduction in received power.

[62]  arXiv:2112.00303 (cross-list from cond-mat.supr-con) [pdf]
Title: An efficient HTS electromagnetic model combining thin-strip, homogeneous and multi-scale methods by T-A formulation
Authors: Lei Wang, Yan Chen
Subjects: Superconductivity (cond-mat.supr-con); Computational Physics (physics.comp-ph)

This study presents an HTS electromagnetic model combining the thin-strip, homogeneous and multi-scale methods using T-A formulation. In particular, we build the thin strips as both the analyzed HTS tapes and the boundaries of the homogeneous bulks where the non-analyzed tapes are merged. Thus, the coil geometry is re-constructed with several bulks, but the bulks boundaries and domains are tackled with different electromagnetic properties, and solved by T and A formulations, respectively. Firstly, we introduce the modeling process and highlight the differences and advantages over the previous models. Then, the accuracy of the proposed model is validated by comparing the results with those from the reference model based on a 2000-turn coil. The distributions of normalized current density, magnetic flux density and hysteresis losses from the two models are highly consistent, and the error of the total loss is less than 1%. Besides, the proposed model is the most time-saving among all the advanced models. Furthermore, the model can be applied in 3D simulations, and the high accuracy and efficiency are validated by simulating a 50-turn racetrack coil. The proposed method provides a feasible approach to simulating coils with many stacked tapes, and we will continue exploring more applications in solving HTS systems with complex geometries.

[63]  arXiv:2112.00400 (cross-list from quant-ph) [pdf, other]
Title: Three-dimensional electrical control of the excitonic fine structure for a quantum dot in a cavity
Comments: 9 pages, 7 figures
Subjects: Quantum Physics (quant-ph); Mesoscale and Nanoscale Physics (cond-mat.mes-hall); Optics (physics.optics)

The excitonic fine structure plays a key role for the quantum light generated by semiconductor quantum dots, both for entangled photon pairs and single photons. Controlling the excitonic fine structure has been demonstrated using electric, magnetic, or strain fields, but not for quantum dots in optical cavities, a key requirement to obtain high source efficiency and near-unity photon indistinguishability. Here, we demonstrate the control of the fine structure splitting for quantum dots embedded in micropillar cavities. We propose a scheme based on remote electrical contacts connected to the pillar cavity through narrow ridges. Numerical simulations show that such a geometry allows for a three-dimensional control of the electrical field. We experimentally demonstrate tuning and reproducible canceling of the fine structure, a crucial step for the reproducibility of quantum light source technology.

[64]  arXiv:2112.00415 (cross-list from econ.GN) [pdf, other]
Title: Inequality in economic shock exposures across the global firm-level supply network
Comments: 19 pages, 15 figures
Subjects: General Economics (econ.GN); Physics and Society (physics.soc-ph)

For centuries, national economies created wealth by engaging in international trade and production. The resulting international supply networks not only increase wealth for countries, but also create systemic risk: economic shocks, triggered by company failures in one country, may propagate to other countries. Using global supply network data on the firm-level, we present a method to estimate a country's exposure to direct and indirect economic losses caused by the failure of a company in another country. We show the network of systemic risk-flows across the world. We find that rich countries expose poor countries much more to systemic risk than the other way round. We demonstrate that higher systemic risk levels are not compensated with a risk premium in GDP, nor do they correlate with economic growth. Systemic risk around the globe appears to be distributed more unequally than wealth. These findings put the often praised benefits for developing countries from globalized production in a new light, since they relate them to the involved risks in the production processes. Exposure risks present a new dimension of global inequality, that most affects the poor in supply shock crises. It becomes fully quantifiable with the proposed method.

[65]  arXiv:2112.00416 (cross-list from math-ph) [pdf, other]
Title: Vorticity equation on surfaces with arbitrary topology
Comments: 22 pages, 2 figures
Subjects: Mathematical Physics (math-ph); Fluid Dynamics (physics.flu-dyn)

We derive the vorticity equation for an incompressible fluid on a 2-dimensional surface with arbitrary topology embedded in 3-dimensional Euclidean space by using a tailored Clebsch parametrization of the flow. In the inviscid limit, we identify conserved surface energy and enstrophy, and obtain the corresponding noncanonical Hamiltonian structure. We then discuss the formulation of the diffusion operator on the surface by examining two alternatives. In the first case, we follow the standard approach for the Navier-Stokes equations on a Riemannian manifold and calculate the diffusion operator by requiring that flows corresponding to Killing fields of the Riemannian metric are not subject to dissipation. For an embedded surface, this leads to a diffusion operator including derivatives of the stream function across the surface. In the second case, using an analogy with the Poisson equation for the Newtonian gravitational potential in general relativity, we construct a diffusion operator taking into account the Ricci scalar curvature of the surface. The resulting vorticity equation is 2-dimensional, and the corresponding diffusive equilibria minimize dissipation under the constraint of curvature energy.

[66]  arXiv:2112.00436 (cross-list from quant-ph) [pdf, ps, other]
Title: Reply to arXiv:2111.13357 ("The Quantum Eraser Non-Paradox'')
Comments: 1 pages, no figures
Subjects: Quantum Physics (quant-ph); History and Philosophy of Physics (physics.hist-ph)

In a recent criticism (arXiv:2111.13357) of our paper arXiv:2111.09347, Drezet argues that we have forgotten to consider superpositions of detector eigenstates. However, such superpositions do not occur in the models our paper is concerned with. We also note that no one has ever observed such detector superpositions.

[67]  arXiv:2112.00489 (cross-list from cond-mat.stat-mech) [pdf, other]
Title: Machine learning of pair-contact process with diffusion
Comments: 15 pages, 11 figures
Subjects: Statistical Mechanics (cond-mat.stat-mech); Computational Physics (physics.comp-ph)

The pair-contact process with diffusion (PCPD), a generalized model of the ordinary pair-contact process (PCP) without diffusion, exhibits a continuous absorbing phase transition. Unlike the PCP, whose nature of phase transition is clearly classified into the directed percolation (DP) universality class, the model of PCPD has been controversially discussed since its infancy. To our best knowledge, there is so far no consensus on whether the phase transition of the PCPD falls into the unknown university classes or else conveys a new kind of non-equilibrium phase transition. In this paper, both unsupervised and supervised learning are employed to study the PCPD with scrutiny. Firstly, two unsupervised learning methods, principal component analysis (PCA) and autoencoder, are taken. Our results show that both methods can cluster the original configurations of the model and provide reasonable estimates of thresholds. Therefore, no matter whether the non-equilibrium lattice model is a random process of unitary (for instance the DP) or binary (for instance the PCP), or whether it contains the diffusion motion of particles, unsupervised leaning can capture the essential, hidden information. Beyond that, supervised learning is also applied to learning the PCPD at different diffusion rates. We proposed a more accurate numerical method to determine the spatial correlation exponent $\nu_{\perp}$, which, to a large degree, avoids the uncertainty of data collapses through naked eyes. Our extensive calculations reveal that $\nu_{\perp}$ of PCPD depends continuously on the diffusion rate $D$, which supports the viewpoint that the PCPD may lead to a new type of absorbing phase transition.

[68]  arXiv:2112.00495 (cross-list from quant-ph) [pdf, other]
Title: In-plane resonant excitation of quantum dots in a dual-mode photonic-crystal waveguide with high $β$-factor
Subjects: Quantum Physics (quant-ph); Optics (physics.optics)

A high-quality quantum dot (QD) single-photon source is a key resource for quantum information processing. Exciting a QD emitter resonantly can greatly suppress decoherence processes and lead to highly indistinguishable single-photon generation. It has, however, remained a challenge to implement strict resonant excitation in a stable and scalable way, without compromising any of the key specs of the source (efficiency, purity, and indistinguishability). In this work, we propose a novel dual-mode photonic-crystal waveguide that realizes direct in-plane resonant excitation of the embedded QDs. The device relies on a two-mode waveguide design, which allows exploiting one mode for excitation of the QD and the other mode for collecting the emitted single photons with high efficiency. By proper engineering of the photonic bandstructure, we propose a design with single-photon collection efficiency of $\beta > 0.95$ together with a single-photon impurity of $\epsilon< 5 \times 10^{-3}$ over a broad spectral and spatial range. The device has a compact footprint of $\sim 50$ $\mu$m$^2$ and would enable stable and scalable excitation of multiple emitters for multi-photon quantum applications.

[69]  arXiv:2112.00507 (cross-list from q-bio.BM) [pdf, ps, other]
Title: Free energy analyses of cell-penetrating peptides using the weighted ensemble method
Authors: Seungho Choe
Comments: 9 pages, 6 figures (w/ Suppl. Info 5 pages, 3 figures)
Subjects: Biomolecules (q-bio.BM); Soft Condensed Matter (cond-mat.soft); Biological Physics (physics.bio-ph)

Cell-penetrating peptides (CPPs) have been widely used for drug-delivery agents; however, it has not been fully understood how they translocate across cell membranes. The Weighted Ensemble (WE) method, one of powerful and flexible path sampling techniques, can be helpful to reveal translocation paths and free energy barriers along those paths. Within the WE approach we show how Arg9 (nona-arginine) and Tat interact with a DOPC/DOPG (4:1) model membrane, and we present free energy (or potential mean of forces, PMFs) profiles of penetration, although a translocation across the membrane has not been observed in the current simulations. Two different compositions of lipid molecules were also tried and compared. Our approach can be applied to any CPPs interacting with various model membranes, and it will provide useful information regarding the transport mechanisms of CPPs.

[70]  arXiv:2112.00538 (cross-list from cs.SI) [pdf]
Title: 'Entanglement' -- A new dynamic metric to measure team flow
Journal-ref: Social Networks 70, 100-111 (2022)
Subjects: Social and Information Networks (cs.SI); Physics and Society (physics.soc-ph)

We introduce "entanglement", a novel metric to measure how synchronized communication between team members is. This measure calculates the Euclidean distance among team members' social network metrics timeseries. We validate the metric with four case studies. The first case study uses entanglement of 11 medical innovation teams to predict team performance and learning behavior. The second case looks at the e-mail communication of 113 senior executives of an international services firm, predicting employee turnover through lack of entanglement of an employee. The third case analyzes the individual employee performance of 81 managers. The fourth case study predicts performance of 13 customer-dedicated teams at a big international company by comparing entanglement in the e-mail interactions with satisfaction of their customers measured through Net Promoter Score (NPS). While we can only speculate about what is causing the entanglement effect, we find that it is a new and versatile indicator for the analysis of employees' communication, analyzing the hitherto underused temporal dimension of online social networks which could be used as a powerful predictor of employee and team performance, employee turnover, and customer satisfaction.

[71]  arXiv:2112.00570 (cross-list from cs.LG) [pdf, other]
Title: Toward Foundation Models for Earth Monitoring: Proposal for a Climate Change Benchmark
Subjects: Machine Learning (cs.LG); Geophysics (physics.geo-ph)

Recent progress in self-supervision shows that pre-training large neural networks on vast amounts of unsupervised data can lead to impressive increases in generalisation for downstream tasks. Such models, recently coined as foundation models, have been transformational to the field of natural language processing. While similar models have also been trained on large corpuses of images, they are not well suited for remote sensing data. To stimulate the development of foundation models for Earth monitoring, we propose to develop a new benchmark comprised of a variety of downstream tasks related to climate change. We believe that this can lead to substantial improvements in many existing applications and facilitate the development of new applications. This proposal is also a call for collaboration with the aim of developing a better evaluation process to mitigate potential downsides of foundation models for Earth monitoring.

[72]  arXiv:2112.00587 (cross-list from cond-mat.dis-nn) [pdf, ps, other]
Title: Terminal stage of highly viscous flow
Authors: U. Buchenau
Comments: 3 pages, 2 figures
Subjects: Disordered Systems and Neural Networks (cond-mat.dis-nn); Fluid Dynamics (physics.flu-dyn)

A very recent precise aging experiment, proving unambiguously the existence of an exponential terminal stage of the highly viscous flow, is evaluated in terms of an analysis of irreversible Eshelby transitions in the five-dimensional shear space. The evaluation reveals that the terminal stage consists of two parts, a larger structural excess entropy part which follows the Eshelby prediction, and a smaller vibrational excess entropy part, which relaxes with the Maxwell time, a factor of thirteen faster than the structural entropy.

[73]  arXiv:2112.00589 (cross-list from cond-mat.mtrl-sci) [pdf, other]
Title: Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron
Subjects: Materials Science (cond-mat.mtrl-sci); Applied Physics (physics.app-ph); Chemical Physics (physics.chem-ph)

The diffusivity of hydrogen in cold-rolled pure iron is investigated using permeation and desorption methods. Electrochemical charging, electro-permeation and thermal desorption spectroscopy (TDS) experiments are conducted. Firstly, the relation between the charging current and the hydrogen concentration is established. Secondly, permeation experiments are conducted at 22, 40 and 67{\deg}C to quantify the diffusivity dependence on temperature. Finally, the diffusivity is estimated by using two types of desorption experiments and Fick's law: (i) a `rest time' method, by which we measure the hydrogen content of samples held at room temperature for different times, and (ii) isothermal desorption experiments at temperatures ranging from 22 to 80{\deg}C, fitting the resulting desorption rate versus time curves. Good agreement is obtained between the isothermal desorption and permeation approaches, with observed differences discussed and rationalised. Moreover, measured diffusivity values for cold-rolled pure iron are also found to be comparable to those reported in the literature. This work demonstrates that isothermal desorption experiments are a convenient approach to determine hydrogen diffusivity over a wide range of temperatures, as facilitated by new TDS systems with fast heating rates.

[74]  arXiv:2112.00611 (cross-list from quant-ph) [pdf, other]
Title: Quantum dynamics of Dissipative Kerr solitons
Subjects: Quantum Physics (quant-ph); Pattern Formation and Solitons (nlin.PS); Optics (physics.optics)

Dissipative Kerr solitons arising from parametric gain in ring microresonators are usually described within a classical mean-field framework. Here, we develop a quantum-mechanical model of dissipative Kerr solitons in terms of the truncated Wigner method, which accounts for quantum effects to lowest order. We show that the soliton experiences a finite lifetime due to quantum fluctuations originating from losses. Reading the results in terms of the theory of open quantum systems, allows to estimate the Liouvillian spectrum of the system. It is characterized by a set of eigenvalues with finite imaginary part and vanishing real part in the limit of vanishing quantum fluctuations. This feature shows that dissipative Kerr solitons are a specific class of dissipative time crystals.

[75]  arXiv:2112.00626 (cross-list from cs.SI) [pdf, other]
Title: The Effect of People Recommenders on Echo Chambers and Polarization
Comments: To appear in: Proceedings of the International AAAI Conference on Web and Social Media, vol. 16 (ICWSM '22)
Subjects: Social and Information Networks (cs.SI); Physics and Society (physics.soc-ph)

The effects of social media on critical issues, such as polarization and misinformation, are under scrutiny due to the disruptive consequences that these phenomena can have on our societies. Among the algorithms routinely used by social media platforms, people-recommender systems are of special interest, as they directly contribute to the evolution of the social network structure, affecting the information and the opinions users are exposed to.
In this paper, we propose a framework to assess the effect of people recommenders on the evolution of opinions. Our proposal is based on Monte Carlo simulations combining link recommendation and opinion-dynamics models. In order to control initial conditions, we define a random network model to generate graphs with opinions, with tunable amounts of modularity and homophily. We join these elements into a methodology to study the effects of the recommender system on echo chambers and polarization. We also show how to use our framework to measure, by means of simulations, the impact of different intervention strategies.
Our thorough experimentation shows that people recommenders can in fact lead to a significant increase in echo chambers. However, this happens only if there is considerable initial homophily in the network. Also, we find that if the network already contains echo chambers, the effect of the recommendation algorithm is negligible. Such findings are robust to two very different opinion dynamics models, a bounded confidence model and an epistemological model.

[76]  arXiv:2112.00637 (cross-list from nlin.CD) [pdf, ps, other]
Title: Nonlinearity of the non-Abelian lattice gauge field theory according to the spectra of Kolmogorov-Sinai entropy and complexity
Authors: Agnes Fulop
Subjects: Chaotic Dynamics (nlin.CD); High Energy Physics - Lattice (hep-lat); Computational Physics (physics.comp-ph)

Yang-Mills fields are an important part of the non-Abelian space theory describing the properties of quark-gluon plasma. The dynamics of the classical fields are given by the Hamiltonian equations of motion, which contain the member of the field strength tensor SU(2) \cite{1.}. This system exhibits chaotic behavior. The homogeneous Yang-Mills equation includes the quadratic part of the field strength tensor $F_{\mu \nu}^a$ expressed in Minkowski space, which was determined by the fields $A_\mu^a $. The dynamics of the classical Yang-Mills field equations arise from the Hamiltonian SU(2) field tensor so that the total energy remains constant and fulfills the Gaussian law. The microcanonical equations of motion are solved on a lattice $N^d$, which shows chaotic dynamics and we research the time-dependent entropy-energy relation on the lattice, which can be shown by the spectrum of Kolmogorov-Sinai entropy and the statistical complexity

[77]  arXiv:2112.00641 (cross-list from astro-ph.SR) [pdf, other]
Title: STITCH: A Subgrid-Scale Model for Energy Buildup in the Solar Corona
Comments: 18 pages, 9 figures, submitted to ApJ
Subjects: Solar and Stellar Astrophysics (astro-ph.SR); Space Physics (physics.space-ph)

The solar corona routinely exhibits explosive activity, in particular coronal mass ejections and their accompanying eruptive flares, that have global-scale consequences. These events and their smaller counterparts, coronal jets, originate in narrow, sinuous filament channels. The key processes that form and evolve the channels operate on still smaller spatial scales and much longer time scales, culminating in a vast separation of characteristic lengths and times that govern these explosive phenomena. In this article, we describe implementation and tests of an efficient subgrid-scale model for generating eruptive structures in magnetohydrodynamics (MHD) coronal simulations. STITCH -- STatistical InjecTion of Condensed Helicity -- is a physics-based, reduced representation of helicity condensation: a process wherein small-scale vortical surface convection forms ubiquitous current sheets, and pervasive reconnection across the sheets mediates an inverse cascade of magnetic helicity and free energy, thereby forming the filament channels. STITCH abstracts these complex processes into a single new term, in the MHD Ohm's law and induction equation, which directly injects tangential magnetic flux into the low corona. We show that this approach is in very good agreement with a full helicity-condensation calculation that treats all of the dynamics explicitly, while enabling substantial reductions in temporal duration especially, but also in spatial resolution. In addition, we illustrate the flexibility of STITCH at forming localized filament channels and at energizing complex surface flux distributions that have sinuous boundaries. STITCH is simple to implement and computationally efficient, making it a powerful new technique for event-based, data-driven modeling of solar eruptions.

[78]  arXiv:2112.00650 (cross-list from hep-ex) [pdf, other]
Title: Non-Parametric Data-Driven Background Modelling using Conditional Probabilities
Comments: 26 pages, 16 figures
Subjects: High Energy Physics - Experiment (hep-ex); Data Analysis, Statistics and Probability (physics.data-an)

Background modelling is one of the main challenges in particle physics data analysis. Commonly employed strategies include the use of simulated events of the background processes, and the fitting of parametric background models to the observed data. However, reliable simulations are not always available or may be extremely costly to produce. As a result, in many cases, uncertainties associated with the accuracy or sample size of the simulation are the limiting factor in the analysis sensitivity. At the same time, parametric models are limited by the a priori unknown functional form and parameter values of the background distribution. These issues become ever more pressing when large datasets become available, as it is already the case at the CERN Large Hadron Collider, and when studying exclusive signatures involving hadronic backgrounds.
Two novel and widely applicable non-parametric data-driven background modelling techniques are presented, which address these issues for a broad class of searches and measurements. The first, relying on ancestral sampling, uses data from a relaxed event selection to estimate a graph of conditional probability density functions of the variables used in the analysis, accounting for significant correlations. A background model is then generated by sampling events from this graph, before the full event selection is applied. In the second, a generative adversarial network is trained to estimate the joint probability density function of the variables used in the analysis. The training is performed on a relaxed event selection which excludes the signal region, and the network is conditioned on a blinding variable. Subsequently, the conditional probability density function is interpolated into the signal region to model the background. The application of each method on a benchmark analysis is presented in detail, and the performance is discussed.

Replacements for Thu, 2 Dec 21

[79]  arXiv:2002.00885 (replaced) [pdf, other]
Title: Diffusion bridges for stochastic Hamiltonian systems and shape evolutions
Subjects: Numerical Analysis (math.NA); Computational Engineering, Finance, and Science (cs.CE); Computational Physics (physics.comp-ph)
[80]  arXiv:2003.09172 (replaced) [pdf, other]
Title: Bimodal distribution of the solar wind at 1 AU
Journal-ref: A&A 635, A44 (2020)
Subjects: Solar and Stellar Astrophysics (astro-ph.SR); Space Physics (physics.space-ph)
[81]  arXiv:2003.13544 (replaced) [pdf, other]
Title: Images of point charges in conducting ellipses and prolate spheroids
Authors: Matt Majic
Journal-ref: J. Math. Phys. 62, 092902 (2021)
Subjects: Classical Physics (physics.class-ph)
[82]  arXiv:2006.11304 (replaced) [pdf, other]
Title: One of Everything: The Breakthrough Listen Exotica Catalog
Comments: Corresponds to version published in ApJS. 122 pages (29 pages + full appendices and references), 13 tables, 6 figures
Journal-ref: ApJS 257, 42 (2021)
Subjects: Instrumentation and Methods for Astrophysics (astro-ph.IM); Popular Physics (physics.pop-ph)
[83]  arXiv:2103.04719 (replaced) [pdf, other]
Title: A review of turbulent skin-friction drag reduction by near-wall transverse forcing
Comments: Typos and formatting corrected
Journal-ref: Progress in Aerospace Sciences, Vol. 123, (100713), 2021
Subjects: Fluid Dynamics (physics.flu-dyn)
[84]  arXiv:2103.07130 (replaced) [pdf, other]
Title: Magnetic Feshbach resonances in collisions of $^{23}$Na$^{40}$K with $^{40}$K
Comments: 10 pages, 3 figures
Journal-ref: New J. Phys. 23 (2021) 115010
Subjects: Atomic Physics (physics.atom-ph)
[85]  arXiv:2103.16589 (replaced) [pdf, ps, other]
Title: Composably secure data processing for Gaussian-modulated continuous variable quantum key distribution
Comments: Accepted version. The code for data-processing is available on github at this https URL
Subjects: Quantum Physics (quant-ph); Applied Physics (physics.app-ph); Computational Physics (physics.comp-ph); Data Analysis, Statistics and Probability (physics.data-an)
[86]  arXiv:2104.01598 (replaced) [pdf]
Title: Changes in seismicity pattern due to the 2016 Kumamoto earthquake sequence and implications for improving the foreshock traffic-light system
Comments: 4 figures
Subjects: Geophysics (physics.geo-ph)
[87]  arXiv:2104.12217 (replaced) [pdf, ps, other]
Title: On the transport equation for probability density functions of turbulent vorticity fields
Subjects: Fluid Dynamics (physics.flu-dyn); Mathematical Physics (math-ph)
[88]  arXiv:2105.04565 (replaced) [pdf, other]
Title: Dark photon limits: a handbook
Comments: 32 pages, 11 figures. Code to reproduce the main results can be found at this https URL whereas code and data for making limit plots can be found at this https URL Matches published version
Journal-ref: Phys. Rev. D 104 (2021) 095029
Subjects: High Energy Physics - Phenomenology (hep-ph); High Energy Astrophysical Phenomena (astro-ph.HE); High Energy Physics - Experiment (hep-ex); Instrumentation and Detectors (physics.ins-det)
[89]  arXiv:2105.11521 (replaced) [pdf, other]
Title: Deep neural network enabled corrective source term approach to hybrid analysis and modeling
Subjects: Neural and Evolutionary Computing (cs.NE); Machine Learning (cs.LG); Computational Physics (physics.comp-ph)
[90]  arXiv:2106.02219 (replaced) [pdf, ps, other]
Title: Discrete time crystals in Bose-Einstein Condensates and symmetry-breaking edge in a simple two-mode theory
Journal-ref: Physical Review A 104, 053327 (2021)
Subjects: Quantum Gases (cond-mat.quant-gas); Mesoscale and Nanoscale Physics (cond-mat.mes-hall); Atomic Physics (physics.atom-ph); Quantum Physics (quant-ph)
[91]  arXiv:2106.07739 (replaced) [pdf, ps, other]
Title: Galactic Traversability: A New Concept for Extragalactic SETI
Authors: Brian C. Lacki
Comments: Published in IJAsB. 22 pages (13 pages main body + references), 2 tables
Journal-ref: International Journal of Astrobiology 20, 359-376 (2021)
Subjects: Astrophysics of Galaxies (astro-ph.GA); Popular Physics (physics.pop-ph)
[92]  arXiv:2107.14604 (replaced) [pdf, other]
Title: Three-Dimensional Data-Driven Magnetostatic Field Computation using Real-World Measurement Data
Comments: 10 pages, 8 figures
Subjects: Computational Engineering, Finance, and Science (cs.CE); Computational Physics (physics.comp-ph)
[93]  arXiv:2108.01376 (replaced) [pdf, other]
Title: A possible link between turbulence and plasma heating
Comments: 21 pages, 7 figures
Subjects: Plasma Physics (physics.plasm-ph); Space Physics (physics.space-ph)
[94]  arXiv:2108.12555 (replaced) [pdf]
Title: Magnetic turnstiles in nonresonant stellarator divertor
Comments: 15 pages, 7 figures
Subjects: Plasma Physics (physics.plasm-ph)
[95]  arXiv:2109.08413 (replaced) [pdf, other]
Title: A quantum-chemical perspective on the laser-induced alignment and orientation dynamics of the CH$_3$X (X = F, Cl, Br, I) molecules
Subjects: Chemical Physics (physics.chem-ph)
[96]  arXiv:2109.09076 (replaced) [pdf, other]
Title: Towards Representation Learning for Atmospheric Dynamics
Journal-ref: NEURIPS 2021 workshop on Tackling Climate Change with Machine Learning (poster)
Subjects: Machine Learning (cs.LG); Atmospheric and Oceanic Physics (physics.ao-ph)
[97]  arXiv:2109.13524 (replaced) [pdf, ps, other]
Title: Structural properties of additive binary hard-sphere mixtures. III. Direct correlation functions
Comments: 11 pages, 8 figures
Journal-ref: Physical Review E 104, 054142 (2021)
Subjects: Soft Condensed Matter (cond-mat.soft); Statistical Mechanics (cond-mat.stat-mech); Chemical Physics (physics.chem-ph)
[98]  arXiv:2110.00325 (replaced) [pdf, other]
Title: Terahertz annular antenna driven with a short intense laser pulse
Subjects: Plasma Physics (physics.plasm-ph); Applied Physics (physics.app-ph)
[99]  arXiv:2110.01290 (replaced) [pdf, other]
Title: Suppression of Unitary Three-body Loss in a Degenerate Bose-Fermi Mixture
Subjects: Quantum Gases (cond-mat.quant-gas); Atomic Physics (physics.atom-ph)
[100]  arXiv:2110.03614 (replaced) [pdf, other]
Title: Exploring the climate system through manifold learning
Subjects: Atmospheric and Oceanic Physics (physics.ao-ph); Chaotic Dynamics (nlin.CD)
[101]  arXiv:2110.05312 (replaced) [pdf, other]
Title: Fundamental Bounds to Time-Harmonic Quadratic Metrics in Electromagnetism: Overview and Implementation
Comments: 37 pages, 11 figures
Subjects: Computational Physics (physics.comp-ph); Mathematical Physics (math-ph)
[102]  arXiv:2110.06573 (replaced) [pdf]
Title: A Parametric and Feasibility Study for Data Sampling of the Dynamic Mode Decomposition--Range, Resolution, and Universal Convergence States
Comments: 57 pages, 19 figures, under review at Nonlinear Dynamics
Subjects: Fluid Dynamics (physics.flu-dyn); Chaotic Dynamics (nlin.CD)
[103]  arXiv:2111.07358 (replaced) [pdf, ps, other]
Title: Study on the radon removal performance of low background activated carbon
Comments: 15 pages,11figures
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)
[104]  arXiv:2111.10430 (replaced) [pdf, ps, other]
Title: Some Error Analysis for the Quantum Phase Estimation Algorithms
Authors: Xiantao Li
Subjects: Quantum Physics (quant-ph); Numerical Analysis (math.NA); Computational Physics (physics.comp-ph)
[105]  arXiv:2111.11698 (replaced) [pdf, other]
Title: Fully kinetic model of plasma expansion in a magnetic nozzle
Comments: 17 pages, 14 figures
Subjects: Plasma Physics (physics.plasm-ph)
[106]  arXiv:2111.12287 (replaced) [pdf]
Title: Discussion on phase ambiguity and multiple beam generation in coherent beam combining system
Authors: H. Jia (1,3 and 4), J. Zuo (2,3 and 4), Q. Bao (1 and 3), C. Geng (2 and 3), A. Tang (2,3 and 4), Y. Luo (1 and 3), Z. Li (2,3 and 4), J. Jiang (1 and 3), F. Li (2 and 3), F. Zou (2,3 and 4), X. Yang (2,3,4 and 5), Z. Pan (2,3 and 4), J. Jiang (2 and 3), J. Ren (6), X. Li (2 and 3) ((1) Key Laboratory of Optical Engineering, Chinese Academy of Sciences, Chengdu, China, (2) Key Laboratory on Adaptive Optics, Chinese Academy of Sciences, Chengdu, China, (3) Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu, China, (4) University of Chinese Academy of Sciences, Beijing, China, (5) University of Electronic Science and Technology of China, Chengdu, China, (6) Chengdu Boltzmann Intelligence Technology Co., Ltd, Chengdu, China)
Comments: 24 pages, 14 figures
Subjects: Optics (physics.optics)
[107]  arXiv:2111.13522 (replaced) [pdf]
Title: Bulk carrier lifetime surpassing 600 us in Upgraded Metallurgical-grade Silicon multicrystalline wafers after Phosphorus Diffusion Gettering
Comments: 11 pages, 3 figures. arXiv admin note: text overlap with arXiv:2106.15926
Subjects: Materials Science (cond-mat.mtrl-sci); Applied Physics (physics.app-ph)
[108]  arXiv:2111.14572 (replaced) [pdf, other]
Title: Bragg's Additivity Rule and Core and Bond model studied by real-time TDDFT electronic stopping simulations: the case of water vapor
Comments: 15 pages 5 figures, 1 table
Subjects: Chemical Physics (physics.chem-ph); Medical Physics (physics.med-ph)
[109]  arXiv:2111.15274 (replaced) [pdf, ps, other]
Title: Dark solitons under higher order dispersion
Comments: 4 pages, 5 figures
Subjects: Pattern Formation and Solitons (nlin.PS); Optics (physics.optics)
[110]  arXiv:2111.15595 (replaced) [pdf, other]
Title: On the relationship between the base pressure and the velocity in the near-wake of an Ahmed body
Comments: 34 pages, 12 figures
Subjects: Fluid Dynamics (physics.flu-dyn)
[ total of 110 entries: 1-110 ]
[ showing up to 2000 entries per page: fewer | more ]

Disable MathJax (What is MathJax?)

Links to: arXiv, form interface, find, physics, recent, 2111, contact, help  (Access key information)